News

Unsere aktuellen Projekte

Marlin 2.0 for Sovol SV01

We compiled the latest „Marlin 2.0.x“ firmware for the „Sovol SV01“ 3D printers. This is a great and free upgrade for your printer.

Highlights

  • Multiple languages
  • Optimized Acceleration, Feedrate and PIDs
  • Mesh bed leveling (without BLTouch)
  • Move between bed corners for manual bed adjustment
  • High accurate Unified Bed Leveling (BLTouch)
  • Corrected print bed size
  • Babystepping enables movement
  • S-Curve Acceleration for smoother direction changes
  • Linear Advance with calibrated K-factor (Removed)
  • SilentBoard support (TMC2208 driver)
  • Advanced Pause
  • Nozzle park feature
  • SD file lists in alphabetical order
  • Scroll long filenames
  • Show SD percentage
  • More accurate thermal protection
  • Working filament runout sensor
  • Persistent storage to EEPROM
  • Print statistics
  • Print progress via M73 (OctoPrint etc.)

Supported devices

  • Sovol SV01 (without modifications)
  • Sovol SV01 with BLTouch
  • Sovol SV01 with SilentBoard
  • Sovol SV01 with SilentBoard and BLTouch

How to install

  • Download the desired firmware update file
  • Download and start Ultimaker Cura
  • Follow these steps
  • Print this file for factory defaults (right click and save as)
  • Reboot and auto home
  • Run nozzle PID autotune

Download

  • More variants if you want. Leave a comment.

  • Video tutorial

    Well-known YouTuber Joshua Bardwell has created a wonderful video tutorial for the Sovol SV01. He explains the bed level function in great detail. Thank you.

    Starting at: 2:38

    Link to his firmware update tutorial.
    Link to his official YouTube channel.


    434 Kommentare

    • Dylan Geroni

      27. Dezember 2022, 2:29

      Hello,
      I am having some trouble with flashing. I flashed the software for the first time earlier today but I accidentally flashed it again but stopped in the middle of the download. Now I have the „blue screen of death“ and Cura wont let me reflash the printer. It says that there isn’t a connection with the printer even though I am connected. Have any suggestions for what I should do?

      • CopterTec

        27. Dezember 2022, 15:46

        Hello that’s a bootloader problem. You need to refresh the bootloader. Not easy :-(. Good luck and Greetings Fabian

      • Dylan Geroni

        27. Dezember 2022, 18:46

        Hello again. Sorry it is not letting me respond to our chat. I was wondering if you could let me know of any ways I can reset my boot loader. Thanks again, Dylan

    • Thad

      26. Dezember 2022, 23:29

      I succesfully loaded my SV01 (stock board, not silent board) with the 2.0.5.3 firmware. I was trying to run and store the „MESH“ under the Unified Bed Levelling (UBL) sub-category. I activate the UBL. I run the mesh, but then the UBL is deactivated when I try to store the mesh settings. So I cannot save my mesh settings. Is this a known issue? Is there a way to resolve it?

      • CopterTec

        27. Dezember 2022, 15:45

        Hello, it’s not possible to run the commands via CLI. Please run all commands via LCD. I can’t test your problem… we sold the printer two years ago. I’m sorry. Greetings Fabian

    • Ricardo Rallo

      20. August 2022, 3:13

      Hello, please excuse me for writing in English. I installed Marlin firmware 2.0.5.3 Coptertec 1.6.3 on my SV01 and the printer display screen does not turn off after turning the printer off using the I/O button, the screen remains on with status ‚SOVOL SV01 Ready‘. Is this expected? How to solve for it to turn off completely without having to pull the power cord from the socket? Thank you very much for your great work.

      • CopterTec

        22. August 2022, 10:20

        Hi, no worry ;-). You just need to switch off the printer via the power supply. Greetings Fabian

        • Ricardo Rallo

          30. September 2022, 15:16

          Hi I noticed that the display remained on also with the power chord disconneted because it was receiving energy from the computer through the USB cable. Thanks for the awesome features of this firmware. Regards.

          • CopterTec

            2. Oktober 2022, 10:29

            Hi yeah that make sense… it’s normal. Thanks for your feedback and have a nice day.

    • Richard Lassmann

      28. März 2022, 15:13

      Hallo,
      ich habe heute mein neues SilentBoard inkl. BLTouch eingebaut und die neue Firmware geflasht. Das leveln hat gut funktioniert und ich habe im Start-G-Code den Befehl „G29 J ;Three point level“ eingetragen. Das macht er auch bei der ersten Position gut, aber wenn er die zweite Position anfährt, versucht er auf x300 zu fahren. Kann man dem Drucker irgendwo mitteilen dass x280 die Maximale Position ist?
      Oder habe ich irgendwo was falsch gemacht? Bin nach diesem Video gegangen: https://www.youtube.com/watch?v=OG8Vkk5zgDc&t=993s

      • CopterTec

        28. März 2022, 16:17

        Hallo, kann es sein dass die Motoren vertauscht wurden? Unsere Werte passen für den Sovol perfekt. Grüße

        • Richard Lassmann

          30. März 2022, 9:20

          Hallo,
          ich habe gerade noch mal nachgesehen, aber die Kabel / Motoren sind alle richtig angeschlossen. Kann ich sonst irgendwelche Daten liefern, was vielleicht helfen könnte?
          Im Moment habe ich nur G29 (ohne „J“) eingetragen, aber Drei-Punkt-Leveling wäre mir schon lieber… 🙂

          • CopterTec

            30. März 2022, 10:03

            Hallo, haben Sie das Leveln über das Display durchgeführt? Dort sollte es normal durchlaufen. Per G-Code habe ich das nie getestet.

            • Richard Lassmann

              30. März 2022, 11:05

              Das Leveln habe ich nachträglich noch mal, wie im Video von Joshua Bardwell (https://youtu.be/gH8F8VRKDko?t=882) durchgeführt.

              Dort wird am Ende des Videos auch die Änderung im Start-Gcode (https://youtu.be/gH8F8VRKDko?t=1288) gezeigt.
              Wenn ich den ohne das „J“ angebe, levelt er automatisch nur in der Mitte des Betts. Wenn man das J mit angibt, macht er ein Drei-Punkt-Leveling, wobei er dann bei mir beim anfahren des zweiten Punktes auf x300 fährt, statt auf max 280.

            • CopterTec

              30. März 2022, 11:13

              Wir haben es immer nur über das Display gemacht. Alles andere ist auch überflüssig. Leider kann ich das ganze nicht mehr testen da der Drucker seit mehr als einem Jahr verkauft ist.

      • Thomas

        9. Juli 2022, 14:59

        Hallo,

        wäre es möglich den Beep bzw. Quittungston (wie bei orginal Firmware vorhanden) in der Firmware wieder einzupflegen??

        mfg Thomas

        • CopterTec

          9. Juli 2022, 16:51

          Hallo Thomas, wir haben die Entwicklung an der Firmware eingestellt… sorry. Grüße Fabian

    • Alex

      19. März 2022, 0:08

      Hallo,

      leider kann ich die SorceCodes nicht kompilieren, da das TMC26XStepper Repository nicht mehr existiert.
      Die aktuelle FW auf der Marlin Seite lässt sich compilieren, aber da bin ich gerade mit der Konfiguration überfordert.
      Kann hier jemand weiterhelfen?

      Fehler:
      LDF Modes: Finder ~ chain, Compatibility ~ soft
      Library Manager: Installing https://github.com/trinamic/TMC26XStepper/archive/master.zip
      PackageException: Got the unrecognized status code ‚404‘ when downloaded https://github.com/trinamic/TMC26XStepper/archive/master.zip:
      File „C:\Users\plonera\.platformio\penv\lib\site-packages\platformio\builder\main.py“, line 181:
      env.SConscript(„$BUILD_SCRIPT“)

      Meine Konfiguration:
      Sovol SV01 – BLTouch – Silentboard. – Visual Studio Code (Win&Mac) – PlatformIO

      Viele Grüße
      Alex

      • CopterTec

        19. März 2022, 7:16

        Hallo Alex, Sie müssen den gesamten source code von unserer GitHub Seite herunterladen und dann die Configuration.h und configuration_adv.h ersetzte. Danach funktioniert es. Auf die aktuelle Firmware-Version ist unsere configuration nicht angepasst. Da es keinerlei Unterstützung von Sovol zu den einfachsten Fragen gab, werden wir die Firmware auch nicht weiter entwickeln. Grüße Fabian

        • Alex

          19. März 2022, 11:17

          Hallo Fabian, ich habe die aktuelle FW von Coptertec aus Github runtergeladen und wie Sie sagen die Configuration für mein SV01 mit SB und BLTouch getauscht. Mit dieser FW und Configuration (unverändert) bricht im Visual Studio Code die Compilierung aufgrund einer fehlenden Resource ab. PackageException: Got the unrecognized status code ‚404‘ when downloaded https://github.com/trinamic/TMC26XStepper/archive/master.zip:

          Das gleiche Ergebnis erhalte ich auf Windows und Mac. Marlin Auto Build und PlatformIO sind installiert. Der Compilier Prozess ist mit der neuesten Marlin Version 2.0.9.3 bei mir erfolgreich durchgelaufen, also gehe ich von keinem technischen Problem auf meinem Entwickler-PC aus.

          • CopterTec

            19. März 2022, 11:41

            Hallo, klingt als hätte sich etwas in den Libaries geändert welche PlatformIO lädt. Ich denke man müsste alles auf die aktuelle Marlin Version anpassen… dürfte aber sehr zeitaufwändig sein. Hat uns damals mehrere Tage gekostet.

      • bruce

        20. März 2022, 4:52

        Hello Alex, I just bought a SV01. I tried to compile the Coptertec as well for the stock machine NO BL Touch. I had the same error as you about the steppers. I think something in the Marlin libraries changed. I was able to work around the issue and get the software compiled. All I had to do was to comment out the TMC stepper line below in the platformio.ini file.

        I do not believe this library is used or needed for a stock SV01 NON Silent.

        #
        # ATmega2560
        #
        [env:mega2560]
        platform = atmelavr
        board = megaatmega2560
        board_build.f_cpu = 16000000L
        lib_deps = ${common.lib_deps}
        ### TMC26XStepper=https://github.com/trinamic/TMC26XStepper/archive/master.zip
        src_filter = ${common.default_src_filter} +

        • CopterTec

          21. März 2022, 8:28

          Great thanks for your help.

    • Stephan Glahs

      22. Februar 2022, 10:15

      Hallo.
      Vielen Dank erstmal für das tolle Projekt, es hat mir sehr weitergeholfen.
      2 Fragen habe ich noch:
      1. Das man Linear Advance nicht aktivieren kann/soll finde ich etwas schade.
      Es stellt sich mir die Frage ob es etwas bringen würde den X und Y-Motor
      gegen einen höherwertigen Motor zu tauschen der sich bei Linear Advance
      eben nicht so schlecht anstellt.
      2. Ich habe einen SV01, der einige mechanische Probleme hatte, wieder auf
      Fordermann gebracht. Außerdem habe ich ihm einen BLTouch und ein
      V6 All-Metal-Hotend verpasst mit Plated Copper Heatblock und Titan-
      Heatbreak.
      E_Steps sind kalibriert und Heater PID Tuning ist auch durchgelaufen.
      Merkwürdigerweise musste ich beim Kalibrieren vom Flow die Flowrate
      auf 88% runterschrauben. Sie scheinen sich ja generell mit diesem Drucker
      gut auszukennen. Wie kann es dazu kommen das eine so große Korrektur
      notwendig ist?

      • CopterTec

        22. Februar 2022, 12:12

        Hallo, gerne. Hier die Antworten:
        1) leider sorgt Linear Advanced für heiße, stotternde Motoren und Druckabbrüche. Das Sovol Board ist dafür nicht ausgelegt. Es müsste die Hauptplatine getauscht werden.
        2) Wahrscheinlich durch das andere Hotend. Das ist nicht ungewöhnlich.
        Grüße Fabian

        • Stephan Glahs

          26. Februar 2022, 17:02

          Vielen Dank erstmal für Deine Antwort.
          Du schreibst das Board müsste getauscht werden, ich habe schon mal geschaut, welches Board
          wäre denn ein sehr gutes Upgrade?

          • CopterTec

            26. Februar 2022, 18:31

            Hallo, da kann ich leider nicht mehr helfen. Wir haben den Drucker vor über einem Jahr verkauft. Sorry…

    • Phenoxy

      18. Februar 2022, 19:16

      Hallo,
      Gibt es auch eine Firmware für den Sovol SV01 mit silentboard und Touchscreen, oder reicht die Firmware vom Silent Board aus ? Bin da leider recht neu in dem Bereich, finde aber auch nix sinnvolles im Netz. 😀

      Danke

      • CopterTec

        21. Februar 2022, 9:16

        Hallo, für das Touchscreen müsste die Firmware angepasst werden. Unsere Version funktioniert dort leider nicht. Grüße

    • Stefan Heffner

      10. Januar 2022, 21:20

      Hallo und vielen Dank für das Kompilieren der Firmware für den Sovol SV01.
      Kann denn ArcWelder (ARC_SUPPORT enabled) mit der Version 1.6.3 genutzt werden?
      Über das OctoPrint-Terminal gesendete Befehle G2 oder G3 erzeugen eine Fehlermeldung und auch M115 zeigt ARC_SUPPORT nicht an, deshalb meine Nachfrage.
      Vielen Dank,
      Stefan H.

      • CopterTec

        11. Januar 2022, 13:33

        Hallo, diese Funktion ist nicht aktiviert kann aber in der Configuration aktiviert werden. Grüße

        • Stefan Heffner

          13. Januar 2022, 17:35

          Vielen Dank für die schnelle Antwort.

          Wo ich nun schon dabei war. die ‚configuration.h‘ anzupassen, wagte ich gleich mal einen Versuch des Neukompilierens der Firmware mit MARLIN 2.0.9.3. Nach dieser Anleitung: https://automatedhome.party/2020/05/08/compiling-marlin-firmware-is-easy-dont-be-afraid-to-do-it/ und mittels Abgleich der configuration.h und Configuration_adv.h der letzten Coptertec Firmware und dem Marlin configuration release für den SV01.
          Müsste jetzt eigentlich passen, aber ‚Marlin Firmware Auto Build‘ fragt nun nach dem „Environment“ für das Board ‚RAMPS 13 EFB‘: entweder ATmega2560 oder ATmega1280. Was muss denn ausgewählt werden?
          Ich würde mich sehr freuen, wenn Sie mir weiterhelfen könnten…

          • CopterTec

            13. Januar 2022, 17:43

            Hallo, es wurde noch einiges mehr angepasst. Daher müssen im Prinzip alle Dateien abgeglichen werden. Das ganze ist ziemlich viel Aufwand weshalb wir dies auch nicht mehr gemacht haben. Am besten mit dem Programm Meld/Diff alles prüfen. Wichtig ist auch, dass die Datei „pins_SOVOL_SV01.h“ mitgenommen wird. Grundsätzlich handelt es sich bei dem original Sovol Board um ein ATmega2560. Grüße

            • Stefan

              13. Januar 2022, 22:52

              Danke für den Hinweis.
              Habe die Datei ‚pins_SOVOL_SV01.h‘ übernommen und die ‚pins.h‘ und ‚boards.h‘ mit den Einträgen/Verweisen für SOVOL_SV01 ergänzt.
              Zumindest war jetzt schon mal das Kompilieren erfolgreich, morgen werde ich ans Aufspielen der neuen Firmware gehen.
              Grüße,
              Stefan

            • CopterTec

              13. Januar 2022, 23:47

              Gerne. Das klingt doch schonmal gut. Dann viel Erfolg.

    • Manfred

      3. Januar 2022, 14:30

      Hallo,
      ich will das BIGTREETECH SKR Mini E3 V2.0 Board einbauen.
      Kann ich da einfach die Firmware mit SilentBoard nehmen, oder muss ich
      in der Configuration.h Datei noch was ändern?
      mfg
      Manfred

      • CopterTec

        3. Januar 2022, 14:49

        Hallo, es handelt sich um eine ganz andere Hardware. Die Konfiguration muss darauf angepasst werden. Grüße

    • Tobias R.

      7. Dezember 2021, 21:56

      Ich suche nach der Nozzle PID Autotune Option im LCD die ihr immer wieder hier erwähnt, aber finde diese nicht.
      In eurer Configuration.h ist die PID_AUTOTUNE_MENU Option auskommentiert, liegt es vielleicht daran?

      Trotzdem vielen Dank für die Bereitstellung!

    • Manu

      3. Dezember 2021, 10:01

      Hello i have a problem with sovol sv01 bltouch+ silent board and firware copertec 1.6.3 . All the configuration done ok . bed leveling , z ofsett . start gcode but when i launch a print he donesn’t start .. can you help me . thanks

      • CopterTec

        3. Dezember 2021, 13:03

        Hello, please check the troubleshooting guide (second line).

    • Manfred Eberl

      7. Oktober 2021, 6:26

      Hallo,
      Warum wurde Linear Advance deaktiviert?
      Mfg
      Manfred

      • CopterTec

        7. Oktober 2021, 9:56

        Hallo, Linear Advanced hat bei den meisten zu schlechten Druckergebnissen, Schrittverlusten und lauten bzw. heißen Motoren geführt. Scheinbar packen die Motortreiber das nicht. Grüße Fabian

        • Manfred

          7. Oktober 2021, 17:43

          ok. Danke.
          mfg
          Manfred

          • CopterTec

            7. Oktober 2021, 18:04

            Sehr gerne.

    • Alex

      28. August 2021, 22:45

      Hi, I’ve been trying to install the 1.5.2 release with BLtouch & silent board but I’m now stuck on the startup screen with „Marlin“ displayed… I can’t connect to the printer via Cura to reflash the firmware… Do you have a solution? Thanks in advance.

      • CopterTec

        30. August 2021, 9:29

        Hi, please follow the „Troubleshooting Guide“. You will find your answer there ;-).

    • Blaise Renaud

      29. Juli 2021, 23:15

      hallo, meinst du es ist möglich, eine Firmware für einen sv03 zu verwenden, indem man einfach die Größe des Trays in Marlin ändert?

      • CopterTec

        30. Juli 2021, 22:02

        Hallo, ich denke dort muss noch einiges mehr angepasst werden. Am besten mal den Source Code laden und ausprobieren. Viele Erfolg.

    • Tim Ouradnik

      18. Juli 2021, 21:33

      Hello,

      I have a Sovol SV01 with the stock board.

      I am trying to flash the firmware, however when I go to compile, I get the following error message:

      error: #error „Oops! Select ‚Arduino/Genuino Mega or Mega 2560‘ in ‚Tools > Board.'“
      #error „Oops! Select ‚Arduino/Genuino Mega or Mega 2560‘ in ‚Tools > Board.'“

      I am running with a Sanguino board, is it okay to change it? WHen I change to this board it seems to compile just fine.

      Thanks,
      Tim

      • CopterTec

        19. Juli 2021, 10:34

        Hi, did you copy the configuration from /config/SOVOL?

    • Techniker

      15. Juni 2021, 1:04

      hey coptertec dudes…
      ich steh recht dicht mit sovol in verbindung und könnt da vlt was machen damit ihr an weitere info’s kommt um die definitiv geile firmware von euch vlt bei sovol einfliessen zu lassen. meldet euch doch mal per mail bei mir.

      • CopterTec

        15. Juni 2021, 9:13

        Hallo, schon passiert.

    • James Roberts

      29. Mai 2021, 0:56

      Hi, please can you help me.
      I’ve used your pre-built firmware before and they have always worked perfectly. This time however I needed to apply the E3D v6 thermistor modification (#define TEMP_SENSOR_0 5). I already had Arduino IDE installed but downloaded the most recent as well as well as the u8glib (for the LCD). First I copied the files from „\config\SOVOL\SV01-SilentBoard_BLTouch\“ into the „\Marlin\“ directory and built the sketch I then uploaded it. Now all I get is a blank screen and no comms? Windows does still detects the COM port, however Cura no longer detects that the printer is there and the Arduio IDE also fails to upload to it? What have I done wrong?

      • CopterTec

        29. Mai 2021, 15:06

        Hi James, oh sounds very bad. Seems that you need to reinstall your bootloader. Thats not so easy.

    • ubrider

      3. Mai 2021, 22:14

      Hi ! Thank you for the firmware, i saw a lot of good feedback and gonna install it in the next few minutes. Any news on the Marlin 2.0.8 version ? and the SV03 version (even if we can modify it on our own) . Thank you 🙂

      • CopterTec

        4. Mai 2021, 12:52

        Hi and welcome for your nice feedback. I think we stop producing a new firmware based on 2.0.8. The Sovol company don’t work with us… we had many questions… but still no answers. Sorry.

        • ubrider

          5. Mai 2021, 6:55

          Hi!
          Ok thank you ! I modified for SV03 (change bed size) and installed it, i don’t know if it’s enough to change bed size, i think UBL smart fill doesn’t do anything (extruder doesn’t move, just a *beep*) but very nice features by the way. I found an improve speed in travel/acceleration.
          That’s unfortunate… I speak with them for 2 weeks now for my warped bed…
          Good luck, i hope you’ll come with a even better optimisation !
          Thank you

          • CopterTec

            5. Mai 2021, 9:46

            Hi, yeah the service is very bad… only some „standard“ answers. Happy printing :-).

    • Axel H Ahlberg

      2. Mai 2021, 4:59

      Just a quick note to thank you for your efforts in supporting the Sovol Sv01 for Marlin firmware updates. I received my first 3D printer 3 weeks ago, upgraded it from 1.1.6.3 to your version 2.0.5.3 of the firmware a week after that, and added a BL Touch using your version yesterday. You’ve improved and customized the firmware to make it easy to keep busy printing and not get lost in which configuration.h change affects what feature. Although I am a retired software engineer, I really wanted a turnkey solution and your efforts on the Sovol SV01 are simply great and have made my transition into the world of 3D printing thoroughly enjoyable, allowing me to learn the necessary tools and methods rather than getting bogged down in code modification and low level testing.
      I’ve printed over 30 objects so far with the only failures being learning how to use Cura parameters to control slicing. And Joshua Bardwell’s tips in the referenced video helped me greatly with the BL Touch parameter setup and slicer preamble edits.
      Thanks very much!

      • CopterTec

        2. Mai 2021, 11:20

        Hello Axel, this is a really nice feedback. Thanks for this words… very cool :-). Have a nice and happy printing time.

    • Stephane

      22. April 2021, 13:37

      Hello,

      The BL touch gives me just 1 palpation at the start of printing.
      I have gcode the G29
      What can be done to make 9 of them all over the board?

      Thank you

      • CopterTec

        22. April 2021, 15:30

        Hello, please make a feature request on GitHub. Thanks

    • Benni War

      12. April 2021, 10:36

      Hi,

      ich bekomme die Tage ein Silent Board für meinen Sovol SV01. Allerdings Habe ich bereits ein V6 Hotend von E3D und einem Semitec 104GT-Thermistor verbaut. Lässt sich das so betreiben mit der deutschen „HEX-Datei“ Firmwareversion?

      • CopterTec

        12. April 2021, 11:48

        Hallo, für das E3D Hotend müssen die Temperaturwerte angepasst werden. Dazu am besten den Source Code unter /configs/Sovol anpassen und nach /Marlin kopieren.

    • Jon P Krueger

      3. April 2021, 1:42

      Hello there,
      was wondering info on the source files as they are blank kind of…I would like to change only some info related to the bltouch like how many probes it does and also the speed that it does the probing.. is there anyway to get a copy of the exact firmware as the hex file for the sv01 stock none silent board with bltouch but the source for it?? id really appreciate it tyvm

      • CopterTec

        3. April 2021, 9:09

        Hello, please read the „GitHub Readme“ ;-). And checkout the folder /configs/Sovol

    • Huabafranze

      27. März 2021, 12:46

      Hallo, wo finde ich im Deutschen Menü die Einstellung des Z-Offset für den BL-Touch Sensor?

      • CopterTec

        27. März 2021, 13:50

        Hallo, es gibt nur einen Eintrag mit Z-Offset. Dieser bezieht sich automatisch auf den BL-Touch Sensor. Grüße

    • H. Schmidt

      26. März 2021, 17:12

      Hallo CopterTec Team,
      vieeeeeeeeeeeeeelen herzlichen Dank für die tolle Firmware! Ihr seid Spitze….

      Ich habe da jedoch eine Frage:
      Was müsste ich ändern, wenn ich Eure Firmware mit einem original Sovol Touchscreen einsetzen möchte?
      Zur Zeit läuft 1.63 mit BL Touch und funktioniert wunderbar.

      Nun möchte ich das Sovol Touchscreen anschließen. Habt ihr da ein paar Tipps für mich?

      Viele Grüße aus Hessen
      Helle

      • CopterTec

        27. März 2021, 13:49

        Hallo, sehr gerne ;-). Im Prinzip müsste in der configuration.h das entsprechende Display und die Anschlüsse konfiguriert werden. Steht auf unserer Liste, leider fehlt nur etwas Zeit dafür. Grüße

        • H. Schmidt

          27. März 2021, 14:22

          Hallo,
          vielen Dank für die rasche Antwort.

          Eigentlich habe ich das passende Display bereits eingebunden und erhalte auch in VSCode keine Fehlermeldung mehr.

          Allerdings habe ich keine Ahnung von Anschlüssen konfigurieren. Daran wirds bestimmt liegen. Könnt Ihr nicht kurz mal reinschauen und mir die entsprechenden Zeilen was ich ändern muss hier auflisten ?

          Vielen Dank im Voraus

          • CopterTec

            28. März 2021, 9:54

            Hallo, für eine Implementierung müssten wir hier die selbe Hardware (Drucker und Display) haben. Beides ist aufgrund von Sovols Inkompetenz im Umgang mit uns aber leider nicht vorhanden. Mal „eben“ anpassen ist leider nicht möglich. Ich hoffe auf Ihr Verständnis. Grüße

            • H. Schmidt

              28. März 2021, 14:49

              Das ist sehr schade….. 🙁
              Damit wird eure Firmware für mich dann unbrauchbar.

              Trotzdem tolle Arbeit!
              Danke

            • CopterTec

              29. März 2021, 0:58

              Das ist wirklich schade… am besten einmal bei Sovol beschweren. Wenn die uns besser Unterstützen würden, könnte es dort deutlich besser voran gehen. 😉

    • Julien Raidelet

      5. März 2021, 20:22

      Bed PID autotune not available using Marlin_2.0.5.3-Sovol_SV01-1.6.3-fr.hex

      >>> M303 E-1 C8 S60
      SENDING:M303 E-1 C8 S60
      PID Autotune failed! Bad extruder number

      • CopterTec

        6. März 2021, 11:00

        Hi, bed PID autotune is disabled. Please check the reason below.

        • Julien Raidelet

          6. März 2021, 16:21

          ok,
          PID autotune is a bit risky ? it has a very good result on my SV-01, hotting is faster than it was before.

          Have another need for setting K linear advance :
          SENDING:M900
          Unknown command: „M900“

          What do you think ?

          Thanks 🙂

          • CopterTec

            7. März 2021, 10:04

            Hi, yeah it’s risky and therefore disabled. Linear Advanced was enabled in previous releases. But the stepper motors get very hot and make some bad sound. The result was a bad print quality. We tried many different k-factor settings without any good result. Seems that the Sovol Mainboard (normal and silent) isn’t good enough for this feature.

    • Franz Huber

      5. März 2021, 16:58

      Hallo, ich habe gerade das Firmwareupdate an meinem Sovol SV01 durchgeführt. Soweit alles gut, auch dien factory reset habe ich durchgeführt.
      Jetzt ist es aber so, dass der Drucker nicht mehr alle alle qcode Dateien druckt. Er heizt zwar auf die eingestellten Temperaturen, startet jedoch nicht mit dem Druck.

      • CopterTec

        5. März 2021, 18:15

        Hallo, wurde in den GCode Dateien eventuell etwas hinzugefügt? Vielleicht auch in Cura direkt. Grüße

        • Franz Huber

          6. März 2021, 22:11

          Es wurde nichts geändert, außer der Firmware. Die Marlin Firmware würde über Cura auf den Drucker gespielt. Anschließend wurde die datei „factory_reset.gcode“ auf dem Drucker ausgeführt um den „Err: EEPROM“-Fehler zu beheben.
          Ich habe herausgefunden, dass wenn ich am Drucker die Extruder Temperatur manuell höher drehe als die Ausgewählte Temperatur bei Slicen, startet der Druck. Der Drucker scheint zu denken, dass der Extruder noch nicht heiß genug ist.

          • CopterTec

            7. März 2021, 10:06

            Hallo, das Problem hatten wir vor kurzem schon mal. Jetzt klingelt es ;-). Bitte einmal das Nozzle PID Tuning laufen lassen. Danach sollte es normal funktionieren.

    • Kethan

      2. März 2021, 3:24

      Flashed to CopterTec to utilize mesh leveling.Ignore mesh leveling for now , i am not sure if its working at this point.Trying to print from Cura slicer, Head always sticks 4mm above the bed (tried everything possible to correct, including manually lowering the Z stepper)after E and Bed heating , i hear click and with all the Z calibration in place, manual leveling in place , it still goes back to 4m gap between nozzle and bed.I even removed command in Cura which was for using stored calibration value from EEPROM.It feels to me like there is somewhere command which tells all my print that my Z=0 is 4mm above the actual 0.

      • CopterTec

        2. März 2021, 10:54

        Hello, please reset the printer as described thats very important. Then follow the calibration steps via the LCD screen. Do not add any further commands in Cura. Greetings

    • Diego

      26. Februar 2021, 21:09

      Installed Marlin_2.0.5.3-Sovol_SV01-1.6.3-BLTouch_en and now I don’t get a „Resume Printing“ option after power losses. I used to get that prompt with my old firmware.

    • Maurizio

      18. Februar 2021, 22:58

      Hi, first of all thanks for your work!
      I’m using your firmare and it works fine, i have compile it from source and all gone well.
      I have only a question: I have noted that LCD menù Tree is different from standard Marlin menù, did you customized it?
      Which files i have to look if i would like to have the marlin default lcd menu tree?

      • CopterTec

        19. Februar 2021, 9:25

        Hi, this is the default menu tree (it depends a bit on active functions). You can find the tree here:
        https://marlinfw.org/docs/features/lcd_menu.html

        • Maurizio

          19. Februar 2021, 12:38

          Ok, but i have seen that lcd menu tree in your FW is different from the standard Marlin, did you modified it?

          • CopterTec

            19. Februar 2021, 12:57

            No it’s stock.

    • Chris

      18. Februar 2021, 13:39

      Moin Männer, erstmal danke für eure Arbeit.

      Hab da mal ne Frage und zwar, ist der Source Code schon soweit angepasst auf den Sv01 ? Ich hab den Sv03 und müsste ja nur die Bettgröße verändern. Wollte aber nicht den ganzen code umschreiben^^

      Grüße, Chris…

      • CopterTec

        18. Februar 2021, 14:21

        Hallo, gerne. Ja korrekt der Source Code ist für den SV01 optimiert. Bitte dazu aus dem Ordner /config/Sovol die entsprechenden Dateien nach /Marlin kopieren. Grüße

        • Chris

          18. Februar 2021, 20:23

          Vielen Dank, hat wunderbar funktioniert. Einfach die Maschinengrenzen für den Sv03 eingetragen, natürlich den Druckernamen geändert kompiliert, auf den Drucker geflasht und es läuft auf Anhieb. Das UBL überzeugt mich am meisten. Danke, Danke. 😉

          P.S: Bei Bedarf kann ich euch die Hex gerne schicken. 😉

          • CopterTec

            19. Februar 2021, 9:24

            Perfekt das hört sich gut an. Es wäre super wenn du mir einmal die Änderungen zusenden könntest (gerne per Mail). Dann können wir dies direkt in die nächste Firmware einfließen lassen. Grüße

            • Chris

              19. Februar 2021, 10:12

              Klar gerne. Schicke ich in den nächsten zwei Stunden.
              An die Mail-Adresse die ich hier von euch finde, richtig?
              Grüße.

            • CopterTec

              19. Februar 2021, 10:15

              Ja genau. Vielen Dank.

    • Michael

      8. Februar 2021, 10:22

      Hallo,
      ich habe meinen Sovol SV01 auch mit einem BL-touch erweitert und die Firmware wie angegeben installiert. Hat auch alles super funktioniert. Nur jetzt beim erstellen der 100 Messpunkte fährt er bei Punkt 87 über den rechten Rand hinaus und rattert, misst aber danach weiter. Mit dem öffnet komme ich auch nicht ganz klar. Wenn ich Drucken will habe ich keine Haftung, egal ob ich auf 0.2 oder auf 0.05 Levele.
      Über einen Tip eurerseits wäre ich sehr Dankbar.

      • CopterTec

        8. Februar 2021, 10:33

        Hallo, bitte einmal über das Menü „EEPROM initialisieren“ anklicken. Danach neu starten und das Problem sollte weg sein. Grüße

        • Michael

          8. Februar 2021, 10:39

          Danke, werde es ausprobieren.

        • Michael

          9. Februar 2021, 7:57

          Guten Morgen,
          wie kann ich den eeprom initialisieren? Find im Menü keinen Eintrag.
          Grüße

          • CopterTec

            9. Februar 2021, 8:31

            Hallo, siehe hier unter „Control“:
            https://marlinfw.org/docs/features/lcd_menu.html

            • Michael

              9. Februar 2021, 8:56

              Hallo,
              vielen Dank für die schnelle Antwort. Habe es über Pronterface und M502 +M500 gemacht. Jetzt wollte ich Z-Offset einstellen. Egal welche Werte ich eingebe bleibt die Nozzle nach dem Befehl G1 F60 Z0 ca. 3 mm über dem Bett stehen. Ich verstehe es nicht.
              Grüße

            • CopterTec

              9. Februar 2021, 10:40

              Hallo, für generellen Support bitte im Forum oder auf Facebook fragen. Wir haben nur die Firmware erstellt. Die Z-Offset Einstellung bitte über das LCD Menü machen. Grüße

        • Michael

          10. Februar 2021, 16:58

          Hallo, habe eeprom initialisiert mit M200 und M500 gespeichert. Danach wieder wieder die Messpunkte probiert und wieder bei Punkt 87 rattert er über den Rand.
          Was kann ich noch machen?
          Grüße

          • CopterTec

            10. Februar 2021, 18:09

            Hallo, ist eventuell einer der Anschlüsse (Schrittmotoren oder Taster) vertauscht? Das würde ebenfalls zum Fehlerbild passen. Es handelt sich aber auch um den richtigen Drucker/Board mit der korrekten Firmware?

            • Michael

              12. Februar 2021, 11:12

              Ja, habe die richtige Firmware für den Sovol Sv01 mit Silentboard und BLTouch. Anschlüsse sind auch korrekt. Beim ersten Messen hat er alle Punkte ohne Probleme gemacht. Nur jetzt nach nochmaligem einstellen des Offset macht dies. Rattert beim 87.Punkt über den Riemen.

            • CopterTec

              12. Februar 2021, 16:10

              Hallo, das einzige logische Problem könnte von einem nicht sauber durchgeführten Reset kommen. Aber Sie hatten ja bereits das EEPROM initialisiert und auch die Reset Datei gedruckt… Vom Fehlerbild klingt es so, als wäre das Bett kleiner als die Kalibrierung denkt. Das würde zu fehlerhaften „Restvariablen“ im Speicher passen. Warum legen Sie den das Mesh nach dem Offset einstellen nochmal an? Dies muss nur einmal davor gemacht werden. Die Firmware ruft das Mesh dann jedesmal selbstständig auf. Grüße

            • Michael

              13. Februar 2021, 18:05

              Hallo, habe nochmal alles neu Installiert. Reset Code gedruckt. Z-Offset eingestellt. Danach UBL und wieder bei punkt 87 das selbe spiel. ;-( Ich habe auch wie Joshua Bardwell in seinem Video gezeigt den Startcode in Cura geändert das er beim start 3punkte levelt. hier rattert er auch bei punkt 2. Wenn der druck beendet ist und er in die hintere linke Ecke fährt rattert er auch nochmal.
              kann ich irgendwo die bettgröße ändern?
              Grüße Michael

            • CopterTec

              14. Februar 2021, 9:26

              Hallo, man kann die Bettgröße im Source Code anpassen. Dies wurde aber bereits perfekt auf den Sovol SV01 ermittelt. Es muss etwas an der Hardware falsch sein. Entweder sind die Endschalter verkehrt angeschlossen oder an der falschen Position. Anders kann ich mir das nicht erklären… Grüße

    • Brett Jacobs

      6. Februar 2021, 0:56

      hello im having issues with the eeprom txt file …it says right click save as …so I save as txt file to sd card put it in my sovol sv01 but it does not show at all in the sd card contents when plugged into the printer…any help would be great thank you

      • CopterTec

        6. Februar 2021, 1:51

        Hello, please save the reset file as „.gcode“ and not as „.txt“.

    • JS

      4. Februar 2021, 14:25

      Hello,

      Any chance to get the last 2.0.7.2 marling firmware with your modifications ?

      Plus can you enable the pid autotune for the bed ?

      Thanks heaps !

      • CopterTec

        4. Februar 2021, 14:59

        Hi, we are very busy at the moment… sorry for that. PID autotune is a bit risky.

    • Luitpold Siess

      2. Februar 2021, 20:46

      Hallo,
      gibt es irgendwo eine Beschreibung der einzelnen Menüpunkte im SV01 mit Marlin Firmware 2.0
      Danke

    • Maurizio Di Terlizzi

      26. Januar 2021, 18:46

      Hi, I would like to recompile the firmware from sources in order to have a reference for some modification that i want to make in configuration.
      If i understood well i have to copy the 4 files from config/SOVOL/desired configuration in Marlin folder and then compile it as usual using visul studio code and platformio.
      It’s right?
      Thanks in advance

      Maurizio

      • CopterTec

        26. Januar 2021, 18:50

        Hi, yeah you are right. Happy compiling.

    • Jan

      24. Januar 2021, 21:21

      Hey,

      Any news to support the Sovol Touchscreen ?

      Jan 🙂

      • CopterTec

        25. Januar 2021, 8:38

        Hi, no. Sovol isn’t cooperative… so no option for any further development. Sorry.

    • Sven

      23. Januar 2021, 14:06

      Hallo. Habe die Installationsanleitung befolgt und soweit hat auch alles geklappt… danke dafür.

      Eine Frage hätte ich jedoch: Klicke ich auf Konfig speichern, ertönt lediglich ein piepen, sonst keinerlei Bestätigung. Ist das soweit richtig? Das gleiche passiert bei Konfig laden.

      • CopterTec

        23. Januar 2021, 15:08

        Hallo, ja das ist korrekt. Es kommt sonst keine weitere Bestätigung.

    • Max

      14. Januar 2021, 3:42

      Hello! I was able to load your precompiled 1.6.3 release for my SV01 just fine. However, I need to recompile in order to increase the temperature to take advantage of my E3D V6 and to try different thermistor settings for the one I installed (this one: https://smile.amazon.com/gp/product/B07D9LSKWK). Which build target is appropriate for the SV01, mega1280 or mega2560?

      • CopterTec

        14. Januar 2021, 9:26

        Hi, the Sovol comes with the bigger ATmega2560. So pick up this version (stock settings for our firmware).

        • Max

          14. Januar 2021, 17:22

          Thanks for answering my question. When I previously tried to install the firmware that I compiled for the 2560, my SV01 just ended up with a blue screen on the display. Did I accidentally flash the one for the touch screen? After I installed your precompiled version, it started working again.

          • CopterTec

            14. Januar 2021, 17:29

            You are welcome. Did you copy the configurations from /config/SOVOL to /Marlin?

            • Max

              14. Januar 2021, 17:46

              That I did not do. I assumed that the top-level Configuration.h was „good“ for the SV01. I should have compared them to see what was different. I’ll give that a go next!

            • CopterTec

              15. Januar 2021, 8:15

              The top level Configuration.h is the same as the stock Marlin config.

            • Max

              14. Januar 2021, 20:23

              I did not copy the configurations from /config/SOVOL to /Marlin. I was under the impression that this release was already specific to the SV01. I’ll take a look at those configs in /SOVOL/ and look at the differences and recompile using them. Will let you know how it goes.

            • CopterTec

              15. Januar 2021, 8:16

              Ok great. I wish you success.

    • Alejandro

      14. Januar 2021, 0:46

      HI, I was writing to wonder about future versions of marlin for the touchscreen LCD for the Sovol Sv01. Im having some issue with the current one that make me want to go back to the original screen!

      • CopterTec

        14. Januar 2021, 9:25

        Hi, we will check the possibility of a touch screen version. But we are very busy at the moment… sorry.

    • elias

      9. Januar 2021, 18:46

      Hello, I’ve just flashed my Sovol SV01 Firmware and have tried several times doing a factory reset with the gcode file but it does not work.
      No matter how I name the gcode file it is always shown as „QRefresh“ in the printer and when I click on it nothing happens.
      What can I do to troubleshoot?

      • CopterTec

        9. Januar 2021, 18:51

        Hi, you only see a „Print successful“. You can reset the printer via the LCD screen too. Just click „reset“ and „initialize EEPROM“.

        • elias

          9. Januar 2021, 19:27

          Ok so I’m not sure what exactly worked but it seems fine now, doesn’t shoot EEPROM Version Error anymore.
          Thanks for the super quick help!

          • CopterTec

            9. Januar 2021, 19:31

            You are welcome.

    • Dennis

      9. Januar 2021, 15:51

      Hallo zusammen,

      ich würde gerne die neuste Firmware von euch nutzen, allerdings für den Sovol SV03. Hatte jetzt die Marlin 2.0.5.3 aufgespielt und dann gemerkt, dass ich beim leveln nur die Bauraumgröße vom SV01 abfahren kann. Wie kann ich den Bauraum in der aufgespielten Firmware ändern bzw. gibt es dafür eine andere hex-Datei? MfG

      • CopterTec

        9. Januar 2021, 18:33

        Hallo, es gibt nur die aufgelisteten Hex Dateien. Leider also nicht für den SV03. Für die andere Baugröße einfach in der configuration.h die notwendigen Änderungen vornehmen.

    • Thomas Körner

      5. Januar 2021, 8:56

      Hallo,
      eine Frage von einem Neuling.
      Ich habe jetzt den Bltouch eingebaut und folgende Firmware aufgespielt.
      Marlin_2.0.5.3-Sovol_SV01-1.6.3-SilentBoard_BLTouch_de.hex
      Bett war vorher gelevelt ohne Bltouch.
      Drucker ist ein Sovol Sv01
      Jetzt habe ich im Menü die Ecken gelevelt.
      Dann UBL laufen lassen (100 Punkte ist er auch angefahren)
      Danach Konfig gespeichert.
      Einen Testbild habe ich dann auch drucken lassen.War super.
      Am nächsten Tag nochmal.Super.
      Dazwischen war der Drucker ausgeschaltet.
      Gedruckt habe ich aus Thingiverse die Quadrate in verschiedenen Größen.
      So Frage passt das so?
      Ich habe natürlich vorher viel gelesen und immer G29 und M500,M501 usw. entdeckt.
      Ich würde mal behaupten das brauch ich nicht oder?
      Wie gesagt das was ich gemacht hatte ist laut dem Testdruck mit den Quadraten gut.
      Danke und Grüße Thomas

      • CopterTec

        5. Januar 2021, 9:36

        Hallo, alles richtig gemacht. Standardmäßig wird das Mesh vor jedem Druck geladen. Man kann über das Menü auch einstellen welches Mesh geladen werden soll. Viel Spaß beim drucken. Grüße Fabian

        • Thomas Körner

          5. Januar 2021, 10:05

          Hallo Fabian,
          Super und Danke für die schnelle Rückmeldung.
          Na dann lag ich ja richtig.
          Also das mit dem G29 M500 usw. benötige ich dann nicht?
          Gruß Thomas

          • CopterTec

            6. Januar 2021, 10:22

            Hallo, korrekt das kann man weg lassen. Grüße

    • AgentPothead

      31. Dezember 2020, 4:14

      Hello from USA. I was wondering if you had updated to support the LCD Touch screen? It seems the default LCD Touchscreen firmware for the SV01 isn’t letting me using m600 filament change. Thanks for any help and happy holidays and be safe from covid.

      • CopterTec

        31. Dezember 2020, 10:57

        Hi, there is no support for the touch screen at the moment… sorry. We are very busy this year. Have a good start into the new year.

    • Manfred

      29. Dezember 2020, 12:57

      Hallo,
      ich habe das Problem, dass er beim UBL Mesh Leveling nur 91 von 100 Punkten abfährt.
      Hab es dann mal auf 25 Punkte geändert, dann fährt er nur 21 Punkte ab.
      Woran liegt das?

      • CopterTec

        29. Dezember 2020, 13:28

        Hallo, eventuell passt das Maximalmaß des Beds nicht. Dann werden die außerhalb liegenden Punkte übersprungen. Handelt es sich um die letzte Firmware Version?

        • Manfred

          29. Dezember 2020, 14:02

          Hatte den Fehler schon gefunden. Ja lag an der Bett Grösse, die habe ich um 5mm kleiner eingestellt,
          weil mir die X-Achse beim G29 J rechts immer mit der Schraube vom Riemenspanner kollidiert ist.
          Dann muss ich die Schraube versetzen.

          • CopterTec

            29. Dezember 2020, 14:56

            Ok super. Danke für die Rückmeldung.

    • Auke Tiekstra

      29. Dezember 2020, 1:35

      Hallo, ich wollte mich vorab für den tollen Support bedanken. Und das obwohl der Sovol mittlerweile verkauft ist.
      Danke

      Ich wollt eigentlich nur Fragen warum in der Coptertec Marlin die Funktion Linear Advance „removed“ ist.
      Wollte das heute mal ausprobieren und zöger jetzt ein wenig.
      Vielen Dank und gesunden Rutsch
      Auke

      • CopterTec

        29. Dezember 2020, 10:25

        Hallo, sehr gerne. Linear Advanced führte leider zu massiven Problem mit Schrittverlusten und heißen Schrittmotoren. Dazu gibt es auch eine sehr lange Diskussion auf GitHub:
        https://github.com/MarlinFirmware/Marlin/issues/16076

        Wir wünschen ebenfalls einen Guten Rutsch und schöne Grüße

    • Christoph

      26. Dezember 2020, 17:55

      Hi, Vielen Dank für die Top Version.
      Hab aber eine Frage. Wo genau finde ich im Menü den punkt Pid Tuning ?
      Habe alles durch gesucht aber nichts wirklich gefunden.
      Nutze die Aktuelle Version von hier auf Deutsch

      Gruß
      Christoph

      • CopterTec

        27. Dezember 2020, 9:50

        Hallo, suchen Sie die Autotune Option für die Nozzle oder die manuelle Einstellmöglichkeit? Das Bed wird nicht PID angesteuert, laut Marlin Documentation wird bei einem gut funktionieren Bed davon abgeraten.

    • David

      24. Dezember 2020, 18:24

      Did you compile with VS Code? What board did you select for the „silent one“. I’m trying to figure out how to make changes to your source for the 350x350mm SV03 bed. Thank you in advance for any help in this matter.

      Also, thank you so much for the SV01 version you compiled. Both of my son’s have added the BLTouch and flashed to it.

      • CopterTec

        25. Dezember 2020, 15:22

        Hi, yeah we are using VScode and Platformio. You need to copy the files from /config/SOVOL/SV01-SilentBoard to /Marlin. Thats all.

    • Manfred

      21. Dezember 2020, 19:25

      Hallo,
      gibt es eine Möglichkeit, das PID Bed zu aktivieren.
      Möchte es gerne durchführen, um zu sehen ob dann die Druckqualität besser wird.

      • CopterTec

        21. Dezember 2020, 20:56

        Hallo, Sie können dies im Source Code aktivieren. Allerdings wird laut Marlin Dokumentation davon dringen abgeraten (gerade bei 8-Bit Boards). Grüße

    • Daniel

      28. November 2020, 15:37

      Hallo!
      ich habe nun seit einigen Wochen auch einen SOVOL SV01 und das „Problem“ dass er wenn ich den Druck vom Display aus Pausiere & wieder fortsetze er mir die Bed & die Nozzle Temp auf 0C setzt!
      Gleiches passiert auch wenn das Filament beim RunOut Sensor ausläuft.

      Leider konnte ich nicht wirklich was in der Marlin Doku finden..
      Könntest du mir sagen was ich hier in Marlin genau anpassen muss?

      danke & LG

      • CopterTec

        28. November 2020, 18:34

        Hallo, welche Firmware kommt den zum Einsatz? Direkten Support gibt es bei Facebook in der Sovol Gruppe. Hier geht es nur um die CopterTec Firmware für den Sovol. Grüße

    • Alfons

      26. November 2020, 21:17

      Hi,

      I tried using the Arc Welder plugin (which uses G2 / G3 commands to draw arcs). Arc_Support seems enabled in the Coptertec version, but when trying it, the printer acts very weirdly.

      Any ideas on how to fix / tweak this? Thanks!

      • CopterTec

        27. November 2020, 9:04

        Hi, Arc Welder isn’t enabled in CopterTec Marlin. I can enable this if you want.

    • Masterclash

      26. November 2020, 17:13

      Thank you for your Work!
      My touch screen is sad at the moment. But it keeps hope 🙂

      • CopterTec

        26. November 2020, 17:31

        Hi, yeah I hope that we have some time in the future.

    • Jean Desmet

      24. November 2020, 12:52

      Hello,
      no news ?
      I compiled the version 2 of Sovol in French and installed,
      while waiting for an update from you or upgrade version 2.0.5.4 ?
      nide day
      Jean

      • CopterTec

        24. November 2020, 13:02

        Hello, no time at the moment… sorry. And the correspondence to Sovol was very bad so we sold our printer.

    • Jean Desmet

      23. November 2020, 11:59

      Hi,
      in the pid autotune i have: PID autotune E1:150
      but i don’t know how to start it ?!

      • CopterTec

        23. November 2020, 12:26

        Hi, there is an option under settings (PID Autotune).

    • Jean Desmet

      22. November 2020, 17:14

      Hi Fabien
      no i did not try to put temperature above asked, for bed and nozzle
      but i have tested also the EN version and i have the same problem

      • CopterTec

        23. November 2020, 8:35

        Ok good to know. Bad issue… Please try this: Nozzle PID autotune via LCD screen.

    • Jean Desmet

      22. November 2020, 14:51

      Board : original mainboard

      modifications , added BL touch V3

      firmware : at the beginning Sovol Sv01 Firmware 116
      changed yesterday for Sovol Sv01 Firmware 2.0 with bltouch from sovol3d site, (works fine)

      no other modifications

      printer purchased last month (2020 october)

      • CopterTec

        23. November 2020, 8:34

        Hi, can you start the PID Autotune via the LCD screen please.

    • Jean Desmet

      22. November 2020, 13:32

      i dont think this is from the file, printing does not start, the printer is waiting for something ??
      temperature bed and extruder are good on the screen, but nothing happens

      exemple file: just the beginning

      • CopterTec

        22. November 2020, 14:21

        Yes sounds so… please give me more details like:
        Board / Modifications / Sensor / Firmware version (under info screen)

    • Fabien

      22. November 2020, 12:23

      Hi!
      Thanks for this very good upgrade of the marlin logiciel. It is a very good improvement for the sovol printer! Love it!
      By the way, have a bug at print start, it’s look like the printer is in an unstoppable loop of extruder heating, and the print is never starting. To start I need to set nozzle temperature a little above the target temp. Then I can start my print.

      Is it something to do to solve this issue ?

      Thanks again for your job.
      Fabien

      • CopterTec

        22. November 2020, 13:16

        Hi, you are welcome ;-). Oh you are the first person with this issue… sounds interesting. Are you sure that the bed temperature is correct? The printer heat up both and only start after a correct nozzle and bed temperature.

        • Fabien

          22. November 2020, 13:34

          Thanks for reply
          Yes bed temperature is OK. I can see the target temperature is very quickly reached and stable, then printer warm-up the extruder. And finally printer stay in an open loop, into extrduer heating.

          The only solution I have to start a print is to be already above the nozzle target temperature when I start a print.
          i.e. target temp nozzle 215° –>I set temp of nozzle at 220°, than print start, I think because warm-up process is squizzed.
          You can send me email if you need more detail, I’m pleased to help.
          fabien

          • CopterTec

            22. November 2020, 14:25

            Interesting that this happens after more than a half year after releasing this firmware. As I wrote to Jean Desmet:
            Please give me more details like:
            Board / Modifications / Sensor / Firmware version (under info screen)

            Plus: please try the english version of this firmware.

            • Max

              14. Januar 2021, 22:21

              Hi. I’m having the same issue right now. I installed the E3D V6 hot end, and a thermistor from Amazon (FYSETC 3Pcs Upgrade HT-NTC100K Thermistor). The thermistor should work with the profile ‚1‘, which I think is the default in your firmware.

              When starting to print, the bed heats up quickly. When it comes to the extruder heating process, it overshoots by about 5-10C, turns off, then falls ~7C below the target. The process then repeats forever. I’ll try a PID tune next, and then maybe see if one of the other Marlin thermistor profiles fits better (the manufacturer says that it should work with 1, 11, or 13). I’m using the English version of the precompiled firmware, latest stable release (not the test/dev one).

            • CopterTec

              15. Januar 2021, 8:19

              Hi, you urgently need to run the PID tuning. Greetings

          • Maik

            22. November 2020, 19:13

            I think i had the same problem and solved it with a hotend pidtune

            • CopterTec

              23. November 2020, 8:35

              Hi, thanks for the hint. Thats a good idea we can test.

    • Jean Desmet

      22. November 2020, 9:38

      Hello,
      Happy to see that there is a French version of Marlin, I installed this version and print the factory reset, reboot, I run a print, the bed heats and extruder also , but after that nothing happens, the print don’t start,
      I installed again the firmware run several times factory reset but nothing , print don’t start
      helps
      what to do ?
      thanks a lot

      • CopterTec

        22. November 2020, 9:42

        Hello, do you get any error message on your LCD screen? Did you print via SD card or via USB?

      • Jean Desmet

        22. November 2020, 12:31

        I print via sd card, and no error message on the screen , just factory reset on the screen…
        i don’t have any result on the screen like Print job finished or Print job done

        • CopterTec

          22. November 2020, 13:11

          Ok that message is normal after you print the factory reset file. Which file do you print? Do you have an example gcode?

        • Fabien

          22. November 2020, 13:39

          Hello Jean,
          It’s look like you have same issue than me.
          Did you try to heat a little above the temperature targets of nozzle and bed before to start a print ?
          Exemple : if your print target is Bed 70° and nozzle 215° –>Go in temperature menu, set manually to Bed 72° and nozzle 220°, than start your print.

          May it can work like that.

          Fabien

          • CopterTec

            22. November 2020, 14:25

            Are you both using the french version? Please test the english variant.

    • Steven

      22. November 2020, 3:25

      Thank you for the easy to flash firmware. I am planning on purchasing the new Creality 4.7.2 silent main board and I was wondering if the silent board firmware will be compatible.

      • CopterTec

        22. November 2020, 8:06

        Hi, it won’t work out of the box. The Creality 4.7.2 board is based on an arm chip… So 32 Bit. You need to compile your own firmware based on our source code. You can also checkout the GitHub branches.

    • Stephane

      19. November 2020, 22:09

      Bonjour, ce firmware fonctionne aussi avec le nouveau ecran tactile?
      Merci

      • CopterTec

        20. November 2020, 7:31

        Hello, can you write in english please? Thank you.

      • Stephane

        20. November 2020, 22:01

        oh sorry !!!
        Hello, this firmware also works with the new touch screen?
        Thank you

        • CopterTec

          21. November 2020, 14:57

          Hi, no worry. I wish I can do it but unfortunately I don’t have time… maybe later this year.

    • Manu

      19. November 2020, 1:20

      Hi, kann man mit der Firmware auch den das Laser Modul einsetzten?

      • CopterTec

        19. November 2020, 8:19

        Hallo, die Marlin Firmware kann dies grundsätzlich. Dafür muss man aber wahrscheinlich unseren Source Code passend abändern.

        • Manu

          19. November 2020, 13:24

          Vielen Dank für die schnelle Antwort. 🙂 Ich hoffe das wird kein großer Aufwand. Leider find ich, wenn es um den Laser geht, nicht wirklich was im Netz wenn es um unabhängige Firmware geht. Werde es mal testen, wenn das Board kommt.

          • CopterTec

            19. November 2020, 14:13

            Gerne eine Rückmeldung geben ob es geklappt hat. Viel Erfolg.

    • Marcel

      18. November 2020, 21:30

      Hi,

      Mein Sovol hat sich selbst gecrasht beim Druck und hat einiges losvibriert dabei. Habe alles gefixt und wollte das bed neu leveln, dies klappte gefühlt auch gut wie immer mit mesh level.

      Allerdings scheint der Drucker deutlich über den gelevelten Punkten zu drucken. Bekomme keinen Druck zu Stande. Zufällig eine Idee? Ist als wenn er trotz des Befehls im gecode das mesh nicht lädt.

    • Dan

      8. November 2020, 5:18

      Hi,
      Im tried to compile using auto marlin (vs code) using your firmware as base as it worked great on my sv01 with silent board and bltouch.

      The problem im having is that i only need to change the thermistor setting and max temp (5, and 285) but now when i try to create a new 100 point mesh, it keeps trying to probe outside of the bed. Ive checked offsets and bed size and they seem correct, What am i missing?

      • CopterTec

        8. November 2020, 8:06

        Hi, did you copy the configuration files from /config/SOVOL/yourversion to /Marlin? This is a very important step.

        • Dan

          8. November 2020, 8:21

          yes coppied it over

          • dan

            8. November 2020, 8:32

            I put a different version of the firmware on then re updated to this one, now it almost works but at the back of the bed it probes right on the edge of the bed, even though it has a 25mm offset in the firmware.

            • CopterTec

              8. November 2020, 9:45

              The offset is invisible. Because of the asymmetrical bed to X-axis arrangement. Thats normal.

            • dan

              8. November 2020, 10:13

              it wasnt doing this on the last firmware, when i downloaded the hex. not sure whats diff now. i have ben clips that it hits but i guess i can remove them during probe. but im getting a mag bed soon so it wont matter then

            • CopterTec

              8. November 2020, 10:27

              Can you upload a video? Much easier for diagnostic.

    • Michau

      31. Oktober 2020, 16:37

      Hi. Are you planning toupdate Coptertec firmware version to the newest version of marlin?

      • CopterTec

        1. November 2020, 17:48

        Hi, yes this is on top of our todo list… but we are very busy at the moment. Sorry for that.

    • George

      31. Oktober 2020, 16:12

      Hi,
      I’ve returned to trying to compile Marlin. I’m a little confused. In your latest RC (Pre-Release 1.6.4 RC1) in Configuration.h for the stock board you have #define MOTHERBOARD BOARD_SOVOL_SV01 and a definition of BOARD_SOVOL_SV01 in boards.h as 1325.

      But in the latest Marlin 2.0.7.2 there is no reference inn boards.h to BOARD_SOVOL_SV01 or 1325 and in the example configuration for SV01, MOTHERBOARD is defined as BOARD_RAMPS_14_EFB (and in the previous version, 2BOARD_RAMPS_13_EFB).

      What is the correct definition of MOTHERBOARD the stock SV01 board?

      Once again, sorry for not posting in Deutsch but I’m sure google translate would stuff it up.

      As before, sorry for not using Deut

      • CopterTec

        1. November 2020, 17:47

        Hi, we changed the source code in version 1.6.4 and added the necessary board configurations. This isn’t available in Marlin 2.0.7.2. We need to update this code… no worry about the language, all fine ;-).

      • James

        19. Januar 2021, 23:10

        Hello, I have come across the same issue with the Marlin Sovol SV01 example configuration.h. Did you resolve which board to use when compiling?

        • CopterTec

          19. Januar 2021, 23:23

          Hi, just copy the files from /congfig/Sovol to /Marlin.

          • James

            19. Januar 2021, 23:58

            Thanks very much for the swift reply, I will leave it as the default from the SV01 example.

            • CopterTec

              20. Januar 2021, 8:10

              You are welcome. The /Marlin folder comes with stock configuration.h. So not usable for the Sovol machine.

    • Roger

      16. Oktober 2020, 9:31

      @CopterTec

      Könnt ihr Eure Firmware an das „optional“ zu erwerbende Touch Display für den SV01 mit Silentboard anpassen?
      Wäre klasse falls das möglich wäre!

      • CopterTec

        16. Oktober 2020, 10:30

        Hallo, gibt es dazu schon fertigen Source Code von Sovol?

        • Roger

          16. Oktober 2020, 10:54

          Es gibt jeweils eine .hex für mit und ohne BL-Touch.
          Ist aber nicht das was ihr braucht-oder?

          • CopterTec

            16. Oktober 2020, 11:00

            Das bringt leider nichts… wir benötigen den ursprünglichen Code mit den jeweiligen Pin Definitionen.

            • Roger

              16. Oktober 2020, 14:19

              Laut Sovol ist der Sourcecode noch nicht verfügbar, weil die Ingenieure noch daran arbeiten.
              Sobald diese fertig sind, wird auch der Sourcecode zur Verfügung gestellt, laut Sovol.
              Bin gespannt:)

            • CopterTec

              16. Oktober 2020, 14:27

              Ja da sind wir auch mal gespannt ;-).

            • Jake Printer

              10. November 2020, 17:11

              The Sovol SV01 source code for the touch screen is now available through their website, will you be releasing a Marlin update for this?

            • CopterTec

              10. November 2020, 19:29

              Hello, I will check this out. Thank you for the update. Please give us some time… We are very busy at the moment.

    • Igor Knaus

      6. Oktober 2020, 0:59

      Hi,

      ich bin nicht so fit in Marlin, aber kann es sein das man in der Acceleration limitiert ist, so das Cura nicht drauf einwirken kann?
      Also z.b. a-max-x 500, a-max-y 500? Weil nur wenn ich die werte per Hand beim Drucken verstelle, passiert was in der Beschleunigung?

      • CopterTec

        6. Oktober 2020, 8:00

        Hallo, das ist korrekt. Die Werte sind gedeckelt um den Drucker nicht zu beschädigen:
        #define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves
        #define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
        #define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves

    • Heini66

      28. September 2020, 14:28

      Moin,
      würde gern euren source selber compilen, aber mit 275°C max nozzle ( also Zeile 453 auf 290°C erhöhen ) sowie Support für 4 Neopixel LED’s in Zeilen 2203-2212
      #define NEOPIXEL_LED
      #if ENABLED(NEOPIXEL_LED)
      #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB – four/three channel driver type (defined in Adafruit_NeoPixel.h)
      #define NEOPIXEL_PIN 12 // LED driving pin
      //#define NEOPIXEL2_TYPE NEOPIXEL_TYPE
      //#define NEOPIXEL2_PIN 5
      #define NEOPIXEL_PIXELS 4 // Number of LEDs in the strip, larger of 2 strips if 2 neopixel strips are used
      #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change – LED by LED. Disable to change all LEDs at once.
      #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
      #define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup

      mit eincompilieren. Leider leuchtet mein Display nur noch blau und zeigt keine Buchstaben mehr bei meinem hex-file ( DieTemperaturänderung und Intergration der Neopixel funktioniert mit dem Source von Marlin 2.0. von der Sovol Seite auf Pin12 des Mainboards und mit dem selbstcompilierten hexfile daraus )
      Ne Idee was da mit der 2.0.5.3 falsch sein könnte?

      • CopterTec

        28. September 2020, 16:04

        Hallo, das ist eine gute Frage… mit der Version davor hat es funktioniert? Eventuell nutzt das LCD die selben Pins wie die Neopixel Ansteuerung. Das müsste man mal testen.

        • heini66

          28. September 2020, 20:57

          mit dem original sovol marlin 2.0 code funktioniert das mit den LED’s auf pin12 und es beeinflusst das display nicht

          • CopterTec

            29. September 2020, 6:33

            Wurde die neue Konfigurationensdatei aus /config/SOVOL den auch übernommen?

            • heini66

              29. September 2020, 14:38

              Hatte nur euren github geclont aber nicht die configs aus config/sovol ins marlin verzeichnis kopiert. Danke für den Tipp. Nun funktioniert es.

            • CopterTec

              29. September 2020, 14:49

              Perfekt… manchmal sind die Probleme leicht zu beheben :-).

    • Michau

      17. September 2020, 18:40

      Hi. I’ve wanted to change thermistor type because i’ve changed to e3d. I’ve downloaded zip file, unpacked and opened in visual studio using PlatformIO. Then i ‚ve copied files from config folder and compiled, i’ve got lot of errors. i think problem is with adafruit and something other. How can i repair it to make everything work? I’ve really want to use this firmware because it is amazing!

      • CopterTec

        17. September 2020, 23:01

        Hi, please download and reinstall platformio. Often it’s a problem with missing files.

      • Ralf

        18. September 2020, 17:44

        Hallo, gibt es auch eine Version der FW für 32 Bit boards wie das SKR 1.4 Turbo?

        • CopterTec

          19. September 2020, 23:36

          Hallo, leider nein da wir ein solches Board nicht besitzen.

    • Roger

      12. September 2020, 14:42

      Hi,

      ich habe ein Problem mit den Steps der Y-Achse mit dem SilentBoard!

      Beim „Auto Home“ wird der Y-Endschalter sauber angefahren, danach läuft die Y-Achse komplett nach vorn(ca.260mm) anstatt zur Bettmitte!?

      Im Display steht aber 130mm!

      Verfahre ich die Y-Achse manuell mit 10mm Schritten, fährt die Y-Achse mechanisch tatsächlich aber 20mm!!

      Die X-Achse passt und steht in Bettmitte. Beim manuellen verfahren der X-Achse stimmen die 10mm Schritte. Nur die Y-Achse fährt einen „doppelten“ Weg!

      An was kann das liegen??

      Habe die aktuelle Firmware „Marlin_2.0.5.3-Sovol_SV01-1.6.3-SilentBoard_BLTouch_de“, die Vorgängerversion, und auch die originale von Sovol versucht, bei allen ist es das selbe Problem, also schließe ich die Firmware eher mal aus. Habe auch den „factory_reset.gcode“ ausgeführt, auch M502 zum restet über das Terminal. Leider bekomme ich den „doppelten“ Verfahrweg nicht weg.

      Kann man das Board auch manuell reseten? Über eine Brücke vielleicht?

      LG

      • CopterTec

        12. September 2020, 16:01

        Hallo, das klingt tatsächlich etwas merkwürdig. Ist eventuell etwas falsch angeschlossen? Wir hatten schon Anwender, bei denen die falsche Verkabelung erst durch unsere Firmware aufgefallen ist. Ansonsten hatten wir diese Art von Fehler bisher leider auch noch nicht… Sie können noch einen Reset über das Menü durchführen. Wichtig dabei: ein Neustart im Anschluss. Hardwareseitig gibt es sonst keinen Reset mehr.

    • Frank

      10. September 2020, 13:23

      Hallo, ich würde mich eher als Anfänger des 3D Drucks bezeichnen, deshalb 2 kurze Fragen.
      – was genau muss dem Startcode bei Verwendung des BLtouch hinzugefügt werden ? Bin da etwas unsicher zwecks der UBL Methode.
      – habt ihr Empfehlungen für die vref Werte beim Silent Board ? Ich habe bei den Kommentaren gelesen, dass eure Firmware etwas mehr braucht ?

      Vielen Dank für die tolle Firmware und eure Hilfe
      Gruss Frank

      • CopterTec

        10. September 2020, 16:19

        Hallo, hier zwei kurze Antworten 😉
        1) es muss nichts hinzugefügt werden. Bitte dazu auch die UBL Dokumentation auf der Marlin Seite beachten.
        2) wir haben leider nur das normale Board im Einsatz.
        Grüße

    • Thor Wright

      27. August 2020, 5:43

      I just recently upgrade to the v.2.2.1 silent board. Ive had good success with your firmware but with the old board and the new board the display on the printer locks up intermittently and I have to power cycle to get out of it. I also have almost no communication with octoprint. Will only sometimes read the sd card in OP. Have you had this experience?

      • CopterTec

        27. August 2020, 8:13

        Hi, not like that… only some OctoPrint connection issues when printing but not always. Is it possible that something is wrongly connected?

    • Hans Pezer

      25. August 2020, 22:54

      Hab ich das richtig verstanden, dass linear_advance aktiviert ist und auf 0 gestellt ist? Oben unter Highlights steht ja removed. Also kann ich den K-Wert mit Marlin 2.05 über den G-Code ansteuern? Danke für die Info.

    • boisselier

      19. August 2020, 13:39

      HI,
      I have a problem with the coordinates of my 3rd point before printing. my plate comes to a stop in Y! how can we modify it?

      • CopterTec

        19. August 2020, 13:59

        Hi, can you send us a video of the problem please.

      • Boisselier

        20. August 2020, 10:42

        Hello my problem

        https://youtu.be/p7BT0Rbca9w

        Thank you

        • CopterTec

          20. August 2020, 11:59

          Hi, seems that something is wrong with your config. The first point is at the wrong position too. Can you reset the printer and try it again please.

          • boisselier

            20. August 2020, 14:12

            I have already made the update several times! always the same problem.

            • CopterTec

              20. August 2020, 14:32

              Not an update… the reset with the gcode as described.

    • Michael Mccarthy

      15. August 2020, 20:12

      i have been using your firmware for my Sovol sv01 for a few weeks now and love it. currently i have the sv01 with the bltouch firmware. I recently purchased the silent board along with an e3dv6 hotend and a titan extruder. i am struggling to figure out how to set up the firmware for this combination so it runs as well as it did before the upgrades.

      • CopterTec

        15. August 2020, 20:39

        Hi, nice that you love the firmware. Please checkout the github branches. There is one person compiling our version with some modifications for the e3d hotend.

        • Michael Mccarthy

          15. August 2020, 23:39

          I’m not sure where these github branches are that would support the e3d product firmware. Would you guys have a non .Hex file with the bl touch and silent board modifications that I could compare the source code to?

    • George

      28. Juli 2020, 4:57

      Hi, I see that the latest Marlin release 2.0.6 has examples for Sovol SV-01 in config but makes no mention in release notes.

      • CopterTec

        28. Juli 2020, 9:46

        Hi, yeah I notice the same. I will update the source code soon as possible. Very busy at the moment…

        • George

          28. Juli 2020, 11:58

          Hi,

          please don’t misunderstand, I wasn’t expecting you to „get right on it“, just an observation in case you missed it.

          Without blow smoke, can I say once again, you provide a vital service for the Platformio challenged.

          George

          • CopterTec

            28. Juli 2020, 12:15

            Hi, ah no worry… ;-). How I can help you with Platformio? Do you reinstalled everything? I use VScode with Platformio.

    • Aziz Ali

      11. Juli 2020, 6:02

      I would like to add the e3d hotend but do not to now how to build firmware in order for the sv01 to understand the new thermistor.

    • Terry Jones

      6. Juli 2020, 1:15

      This may sound incredible naive but where/how do we add the 502 and 500 line to factory reset after firmware download?

      • CopterTec

        6. Juli 2020, 12:02

        Hi, just download the file (right click > save as) and then print this file from SD card (like a print job).

        • Terry Jones

          6. Juli 2020, 14:07

          “ Hi, just download the file (right click > save as) and then print this file from SD card (like a print job).”

          How do I know if it worked?

          • CopterTec

            6. Juli 2020, 14:43

            You will see a „Print job finished“ information… or something like „Print job done“:

            • Terry Jones

              6. Juli 2020, 23:40

              Does the printer have to warm up and go through that whole process before it will run that factory reset or not?

            • CopterTec

              7. Juli 2020, 9:21

              No. Just print… its done in under one second.

    • George

      1. Juli 2020, 16:37

      Hi

      I’d like to be able to compile Marlin using your Configs, so that I can make minor changes. To test that I am able to compile correctly I recompiled your source, with a view to comparing HEX files. When I compile I get the following errors

      C Adafruit_MAX31865.h .pio\libdeps\mega2560\Adafruit_MAX31865
      passing NULL to non-pointer argument 1 of ‚Adafruit_SPIDevice::Adafruit_SPIDevice(int8_t, uint32_t, BitOrder, uint8_t, SPIClass*)‘ [-Wconversion-null]

      {} c_cpp_properties.json .vscode
      Cannot find C:\Marlin_C\include“. [9,17]
      Cannot find C:\Marlin_C\include“. [36,21]

      The HEX I have generated is WILDLY different than yours.

      Originally I had an error on liquidcrystal_sr1w.h, I deleted the offending multi-line comment.
      Google seems to think I can ignore the missing include directory

      Any thoughts would be helpful.

      • CopterTec

        1. Juli 2020, 17:06

        Hi, please copy the config files from /config/SOVOL/yourversion to /Marlin. I think thats your problem.

        • George

          2. Juli 2020, 1:01

          You are correct of course, in the first place I didn’t copy the config files to the correct place but even after doing so I still have the include error and a hex file that is approx the correct size but who’s content is very different.

          Thanks again for your work to support a pretty good printer.

          • CopterTec

            2. Juli 2020, 9:49

            Hi, is it possible that you updated some libraries? Platformio shows you some updates for marlin specific libraries. Do not update these libs.

            • George

              2. Juli 2020, 13:40

              Of course thats what happened in my flapping about trying to get PlatformIO to work. I’m going to uninstall and try again, thanks again for all your efforts.

            • CopterTec

              2. Juli 2020, 17:41

              Ok great. Please write me a feedback after you reinstalled everything.

    • Andreas Lechner

      19. Juni 2020, 20:33

      Hallo,
      Ich besitze einen SovolSV01 mit Silentboard nun möchte ich ein e3d-Hotend verbauen, dazu muss ich den Thermistor in der Firmware ändern wo finde ich den Quellcode für das Silentboard(deutsch)?
      Danke im voraus.

      • CopterTec

        19. Juni 2020, 22:10

        Hallo, die Konfigurationen sind unter /config/SOVOL zu finden.

    • Mark Steele

      15. Juni 2020, 3:41

      Hello,

      I was using 2.0.5.3 without the BL touch with much success. I installed a BL Touch today and updated the firmware to the BL Touch version. I’m having some issues with the mesh leveling – at least I think I am – when I issue the G29 command the printer simply beeps but does not run the leveling.

      I did find the 100 point leveling setup and ran that – but I don’t know if that is the same thing.

      Do you have a set of instructions on how to first run / configure the BL Touch with your firmware version?

      I was able to successfully setup the Probe Z offset and have gotten some test prints working OK but would like to make sure I am using it properly.

      Best regards,

      Mark

    • Jeff Stuntebeck

      7. Juni 2020, 3:40

      On the bottom of the menu i still have the „Err: EEPROM Version“ after running the .gcode you provided and everything.

      • CopterTec

        7. Juni 2020, 21:17

        Hi, please initialize the EEPROM via the menu option „Initialize EEPROM“ and restart.

    • George

      4. Juni 2020, 15:06

      Can I say upfront that this is a great service, Marlin is an awful lot to take in. I hope you will continue to produce pre-compiled object files as new versions of Marlin become available. Nevertheless I’d like to be able to produce my own modified code, to that end do you have a list of the changes (or perhaps a script) required to as-download version of Marlin to produce a SV-01 specific version.

      I note that you do not include platformio.ini, it might be helpful for Marlin virgins like me if you did.

      My apologies for my rudeness of not use German on a German site but in common with most Anglo-saxons my multi language skills are nonexistent. I see yours a pretty good which makes me even more embarrassed.

      • CopterTec

        4. Juni 2020, 15:29

        Hi, no problem english is fine too ;-). Please checkout the Source Code on Github. You can download the platformio.ini file for the Sovol printer firmware there.

        • George

          6. Juni 2020, 14:30

          Re. platformio.ini. I don’t seem to be able to reply. My point is that platformio.ini will be different from stock Marlin and turbo and non-turbo will be different.

          • CopterTec

            6. Juni 2020, 19:35

            This is only a Marlin stock build for these modfications: stock, silentboard, stock bltouch and silentboard bltouch.

        • George

          13. Juni 2020, 19:30

          Oh dear, I have to make another apology for posting nonsense. I was thinking about an upgrade to SKR (which has 2 versions with different CPUs) thus the need for platformio, but of course pointless on the stock Sovol board.

          • CopterTec

            15. Juni 2020, 12:18

            Yeah, no changes for the stock Sovol board. But you need to change some settings inside the platformio.ino for other boards.

    • Jan Busk

      2. Juni 2020, 11:53

      Thank you very much! You just made my life easier.

      • CopterTec

        2. Juni 2020, 11:57

        You are welcome :-).

    • Abdul_aziz

      31. Mai 2020, 9:46

      I hate to sound like a noob but I am using a Mac and dont know how to save the file to print defaults. When ever I try to “save link as” It ends up as a .txt file. Is that how it is supposed to be? Do I just save it straight to sd card?

      • CopterTec

        1. Juni 2020, 16:26

        Hi, just change the ending to „.gcode“ and copy it to your SD card.

    • Jason

      30. Mai 2020, 2:44

      „Follow these steps“ link is broken and using Josh’s video for reference and now the screen says ERR: EEPROM Version. Please help and thank you for all of your work and time!

      • CopterTec

        30. Mai 2020, 8:01

        Hi, I updated the link for the instruction. About your EEPROM error: Please print the reset file as described and restart.

    • Matt Paulin

      20. Mai 2020, 15:23

      Hi thank you for the hard work you have done the hard work. I am trying to add a E3d Hot end to my sovol and want to use your firmware. I need to change the thermistor settings to #define TEMP_SENSOR_0 5, and can do this in the source code but I also have the bltouch and can’t figure out if the source code is configured for this. any help would be greatly appreciated.

    • Rick

      14. Mai 2020, 5:53

      Hi, I was wondering if this also supports TH3D’s EZABL or does it only work with the BLTOUCH?

      Thanks

      • CopterTec

        14. Mai 2020, 9:52

        Hi, good question. You can try it… and if not: just download the source code, make some changes and compile it.

    • David

      10. Mai 2020, 16:50

      Does the the Sovol SV01 (normal board, not the silent version) support PID control (and therefore PID auto ttuning) for the heated bed?
      In your firmware I see the PIDTEMPBED option is disabled and I am wondering if it would work enabling it.

      Thank you very much for providing the firmware!

      • CopterTec

        11. Mai 2020, 10:19

        Hello, PID control for the bed is disabled. This is highly recommended. You can find some informations (why) in the Marlin source code. You are welcome.

    • McMarty

      8. Mai 2020, 11:45

      Hello, I’m using the latest French Stock version that you offered. I have problems with the temperature stability at startup since I installed it.

      When I launch a scheduled print at 220 ° C for example, it will not succeed in stabilizing. I have to manually enter a higher temperature in the parameters of the machine and there it leaves then I put my desired temperature.

      This also causes a problem when changing the filament during printing, it remains displayed „nozzle heating“ but fails to stabilize to continue printing. I nevertheless specify that I carried out the PID adjustment.

      Otherwise the rest is excellent.

      • CopterTec

        8. Mai 2020, 12:28

        Hi, please run a PID auto tuning (via menu). Happy to hear some feedback.

    • Vasilii

      4. Mai 2020, 21:15

      Used Marlin from your github page for my sv01 for a month already, worked as a charm, especially bed leveling. But now after I got a silent board I see my hot-end does not heat enough (actual temp is less ~30 degrees Celsius that the one shown on screen). Will look into that, but still thanks for your work!

      • CopterTec

        5. Mai 2020, 9:46

        Hi, thanks for your great feedback. I think this could be a hotend problem…

    • Alfons

      30. April 2020, 22:16

      Hello,

      How does your version compare to the Sovol Marlin 2.0 version? Are there any (important) differences?

      Thanks

      • CopterTec

        2. Mai 2020, 1:35

        Hi, it’s based on Marlin 2.0.5.3 with many bug fixes. It also comes with a lot of extras. Please check the „Highlights“ section.

    • Tuan Nguyen

      27. April 2020, 18:32

      I got sovol and i did updated Marlin-2.0.5.3 by watching your video, after firm done. Then i load gcode from cura in to micro sd car, and load it to machine, start the print now all it does is heatting up nozzel and bed, ????? machine not running.. help

      • CopterTec

        27. April 2020, 18:37

        Hi, please follow the instruction. Very important: „Print this file for factory defaults“.

    • Gareth

      12. April 2020, 22:58

      Is it possible to have option to set probe offset (x,y) in a menu?

      • CopterTec

        13. April 2020, 10:40

        Hi, I think there is no option available at the moment. It’s hard coded inside the Marlin sources. But you can compile your own firmware or ask the Marlin community for this option… would be nice.

    • Jonathan

      10. April 2020, 13:47

      Hi there, have added standard board with bk touch and installed BL touch and the prob does not stop the prj Ter crashing into the board ?

      • CopterTec

        10. April 2020, 14:14

        Hi, is it possible that you connected the BLTouch in a wrong way. The BLTouch LED lights solid blue if everything is correct.

        • Tobias

          12. April 2020, 15:30

          Hi,

          Erstmal vielen Dank für die Viele Arbeit an der Firmware 🙂

          Leider habe ich dasselbe Problem wie Jonathan – beim „Home“ fährt der Sensor mittig über dem Bett aus. Z fährt nach und stoppt dann nicht. sondern versucht das Hotend durch das Bett zu prügeln… Z-Stepper rattern, es hilft nur Strom aus.

          Ich habe die Marlin_2.0.5.3-Sovol_SV01-1.6.3-BLTouch_de, der BLTouch hat laut Aufdruck V3.1. Der Selbsttest geht, liefert aber kein Ergebnis zurück (Sensor fährt ca. 10x rein und raus). Am Sensor leuchten links rot und rechts blau (Dauerleuchten).

          Eine Idee was ich falsch gemacht haben könnte?
          Viele Grüße
          Tobias

          • CopterTec

            13. April 2020, 10:43

            Hallo, dort war glaube ich nur die X und Y Achse am Board vertauscht. Oft ist auch nur der Sensor falsch herum angeschlossen. Am besten einmal die Kabel der Schrittmotoren kontrollieren (richtiger Steckplatz). Außerdem sollte der BLTouch nach dem initialisieren blau leuchten. Rot blinkend deutet auf einen vertauschten Anschluss hin. Grüße

            • Tobias Hagen

              13. April 2020, 12:16

              Hi,

              es blinkt nichts – es leuchtet dauerhaft rot und blau wenn der Sensor eingefahren ist, das rote Licht geht aus wenn er ausgefahren ist (blau leuchtet weiter). Beim Einschalten geht zuerst rot an, nach ein paar Sekunden dann auch blau. Schrittmotoren sind richtig drin, ich habe ja schon gedruckt vor der BLTouch-Installation.
              Ich bin mittlerweile auf diese Seite gestossen: https://www.antclabs.com/wiring3 – Die sagen, bei etlichen Crealityboards sei ein zu großer Kondensator drauf.
              Auf dem Board wollte ich eigentlich nicht rumlöten, also weitergesucht und das hier gefunden: https://github.com/InsanityAutomation/Marlin/commit/15ce74badfd3a1b6e6ffabf882234ffa77682715 (aus diesem Video: https://www.youtube.com/watch?v=sOFxalLOZOI )
              Anscheinend funktioniert es, wenn man den BLTouch in den 5V-Modus versetzt. Die Frage ist nur, ob sich das mit Deiner Firmware-Version verträgt oder ob ich da im Quellcode irgendetwas zerschieße..

              Nach allem was ich bisher gelesen habe betrifft das Problem auch nur die BLTouch ab V3.x, die Vorversionen sind wohl nicht betroffen.

              Viele Grüße
              Tobias

            • CopterTec

              13. April 2020, 13:51

              Ok das mit dem blinken/leuchten klingt schon mal gut. Das mit der falschen Verkabelung ist bei dem anderen Anwender auch erst durch die neue Firmware aufgefallen. Daher bitte auf jeden Fall einmal prüfen. Ich denke nicht das es an den Kondensatoren liegt, passt überhaupt nicht vom Fehlerbild.
              Welches Problem ich hatte: bei mir war der BLTouch zu hoch im Verhältnis zur Nozzle. Es war also unmöglich den Sensor auszulösen, bevor die Düse auf das Bett gekommen ist. Ich habe dann das Hotend heißt gemacht und die Düse weiter rein geschraubt. Ein schneller Test wäre hier, den Sensor einmal manuell mit einem Stift oder ähnlichem auszulösen.
              Grüße

            • Tobias Hagen

              13. April 2020, 14:19

              So, die Verkabelung der Stepper habe ich nochmal geprüft – passt. Die Verkabelung des Sensors sieht so aus: https://imgur.com/a/bmPKmYF
              Der Sensor scheint auch bei mir zuweit oben zu hängen, da packe ich noch Unterlegscheiben dazwischen – aber er löst auch beim Fingertest nicht aus, das hab ich schon probiert (will ja kein Loch im Bett haben 😉 )

            • CopterTec

              13. April 2020, 14:21

              Also wenn er gar nicht auslöst muss ja zwangsweise etwas falsch angeschlossen sein. Am besten mal in der Sovol Facebook Gruppe nachfragen.

              PS: Oder handelt es sich eventuell um einen gefälschten BLTouch? Die machen leider nur Probleme… der originale kostet etwa 50€.

            • Tobias Hagen

              13. April 2020, 14:39

              Das Bild hab ich auch eben in die FB-Gruppe gepackt. Gekauft habe ich Drucker und Sensor über Ebay (sovol-3d-printer-uk), der Sensor hat €43 gekostet, auf der Verpackung steht „Creality BLTouch“ drauf – ich würde den mal für echt halten wollen..
              Hoffen wir mal das über FB was zurückkommt.

              Vielen Dank für Deine Bemühungen! Ich werde berichten, sobald er läuft.

              Viele Grüße
              Tobias

            • CopterTec

              13. April 2020, 16:30

              Ok klingt nach original… Bei Facebook melden sich normalerweise immer ein paar helle Köpfe ;-).

            • Tobias Hagen

              13. April 2020, 20:55

              Es geht!

              Das eine Problem war die Hardware – der Sensor sitzt, wenn man ihn aus der Box montiert, in ausgefahrenem Zustand einen Tick oberhalb der Düse. 2,2mm Unterlegscheiben drunter, passt.

              Das zweite Problem saß vor dem Gerät. Ich hatte irgendwo gelesen, dass jemand das Problem gelöst hat, indem er die Kabel im Z-Endschalterstecker getauscht hat. Also hab ich sie auch getauscht (Hinweis: Bevor ich gefummelt habe, waren sie richtig – in meinem Bild oben sind sie also falschrum).. Die Jungs in der FB-Gruppe haben mit einem Verdrahtungsplan geholfen. Ich also die Pins im Stecker wieder getauscht, und oh Wunder, kaum macht man’s richtig, funktioniert’s..

              Nachdem der Sensor jetzt also etwas tiefer sitzt, und die Kabel (wieder) richtig sitzen, funktioniert alles!

              Vielen Dank nochmal für die Unterstützung 🙂

              Viele Grüße
              Tobias

            • CopterTec

              14. April 2020, 7:23

              Super das freut mich. Ich sag ja, die Sovol User bei Facebook helfen immer :-). Viel Spaß beim Drucken. Grüße

    • Thomas

      5. April 2020, 11:40

      Hallo,

      nach Hochladen des 2.0.53 zeigt das Display am SV01 Err: EEPROM Version an. Normal oder habe ich etwas vergessen?

      LG

      • CopterTec

        5. April 2020, 12:48

        Hallo, dieser Fehler wurde hier schon mehrfach beschrieben und gelöst. Bitte wie in der Installationsanleitung den Drucker zurück setzen. Grüße

    • Adam Barnes

      5. April 2020, 2:07

      Would it be possible to get a copy of the Hex for the regular SV01 with a max temp of 290 on the hot end? I swapped it out for an E3D V6 and need to go a bit hotter than 260 for the filament I’m trying to use for face shields.

      • CopterTec

        5. April 2020, 12:50

        Hi, you can download the source code from the link above. Just download, change the necessary line and compile it.

    • Michael Just

      3. April 2020, 23:52

      Hallo, die Firmware ist erstmal super. Ich habe ein Problem, wenn ich die Ecken automatisch anfahre oder eine Mesh-Leveling mache fährt das Bed immer viel zu weit vor, was kann das sein? Die Düse ist dann immer hinten über dem Rand und da kann man ja nicht leveln. Ich hoffe ich habe mich verständlich Ausgedrückt? LG

      • CopterTec

        4. April 2020, 12:37

        Hallo, welche Firmware Version kommt den zum Einsatz? Ein kurzes Video (gerne auch per Mail) wäre super.

        • Michael Just

          4. April 2020, 14:19

          Die neueste Version ist es, die Release 1.6.3. An welche Mailadresse soll es geschickt werden?

          LG

          • CopterTec

            5. April 2020, 12:55

            Wichtig wäre die Variante (Standard, SilentBoard, …) und welche Änderungen am Drucker vorgenommen wurden. Das ganze bitte an die E-Mail Adresse aus dem Impressum.

            • Thomas

              17. April 2020, 17:49

              Hallo,
              ich habe das gleiche Problem mit den XY Abmessungen. Wie schon beschrieben fährt die Nozzle beim Nivellieren über den hinteren Bed-Teil. Dann ist beim Drucken, egal mit PrusaSlice oder Cura gesliced, die Bedbreite nicht ausgenutzt wird. Die Bewegung hört viel zu früh aus und lässt einen ordentlichen Rand. Im Slicer sieht alles gut. Es sieht so aus als ob im Drucker X und Y Breite vertauscht wären.
              Gibt es da eine Einstellmöglichkeit im Drucker oder ist das etwas das in der Firmware gefixt werden müsste?

            • CopterTec

              17. April 2020, 19:49

              Hallo, nein das hatten wir extra getestet. Wenn man die gesamte Fläche nutzen möchte muss man X=290mm und Y=255mm angeben. Wenn der Druck genau mittig seien soll und rechts 10mm fehlen dürfen, müssen es X=280mm seien. Vielleicht sind die beiden Achsen falsch angeschlossen? Das wäre bei Sovol nicht das erste mal.

    • Jerrit

      3. April 2020, 20:53

      Es lag wirklich an der SD Karte… ist hiermit gelöst, danke für die Hilfe !

      • CopterTec

        4. April 2020, 12:36

        Super freut mich zu hören. Gerne geschehen.

    • Merlin

      3. April 2020, 18:40

      Hallo, woher habt ihr die Info, dass das Silentboard die Stepperdriver nicht per UART ansteuern kann?

      • CopterTec

        3. April 2020, 19:21

        Hallo, das ist einfach herauszufinden:
        1) handelt es sich um das Creality Board ohne jegliche Änderung (außer die anderen Treiber)
        2) wenn man die UART Verbindung in der Firmware aktiviert, müsste man eigentlich die Daten der Stepper Treiber bekommen. Dem ist aber leider nicht so.
        3) Bietet Sovol gar keine getrennten Firmware Dateien an. Wenn die Treiber aber über UART verbunden wären, würde die Standard Firmware überhaupt nicht laufen.

    • CopterTec

      1. April 2020, 16:03

      News: Upgrade to Marlin-2.0.5.3

    • Jerrit

      1. April 2020, 13:11

      OK es waren wirklich XY 1.196V / Z 1.600V / E 1.392V eingestelt, jetzt sind die korrekten Werte eingestellt.
      Danke!

      • CopterTec

        1. April 2020, 14:06

        Gerne. Freue mich auf eine Rückmeldung ob nun alles funktioniert.

        • Jerrit

          1. April 2020, 18:50

          Die Anpassung der doch massiv zu hohen Spannung hat leider nichts gebracht, der Druck bricht wieder mittendrin ab. 2 Stunden lief alles Problemlos.
          Liebe Grüße
          Jerrit

          • CopterTec

            1. April 2020, 18:59

            Ok das ist schade. Die verwendete Firmware kommt auf zahlreichen Silentboards ohne Probleme zum Einsatz. Daher gehe ich erstmal nicht von einem allgemeinen Fehler in der Firmware aus. Eventuell könnte es noch an der SD Karte liegen, da diese Firmware eine Sortierung implementiert hat. Oder wird über USB gedruckt? Das wiederum klappt mit den aktuellen Marlin Versionen tatsächlich bei einigen Nutzern nicht besonders gut, da diese mehr Ressourcen abfordern. Heute haben wir auch die Marlin 2.0.5.3 veröffentlicht.

    • Jerrit

      31. März 2020, 19:27

      Hallo, ich habe ein Problem mit der stabilen Version Marlin_2.0.3-Sovol_SV01-1.5.2-SilentBoard_en.hex.
      Der gesamte Drucker bricht bei Druckaufträgen (4 gleiche Bauteile verteilt auf dem Druck-bett) die länger als 3 Stunden gehen ab.
      Der Abbruch erfolgt bei ca 70-85%.
      Drucke ich das selbe Teil allein mittig auf dem Druck-bett, läuft der Druck durch.
      Ich benutze extra Marlen 2.0.3, dass ich Mesh Badleveling nutzen kann.
      Die neuste Firmware habe ich bereits getestet, hier erfolgt noch früher ein Abbruch.
      Vielen dank im Voraus für die Antwort 🙂

      • CopterTec

        31. März 2020, 20:46

        Hallo, klingt nach nicht korrekt eingestellten Vref Werten. Das Problem hatten wir auch mal. Unsere Firmware benötigt etwas mehr Strom (an den Schrittmotoren), daher kommt es bei falschen Werten zu abbrüchen. Gerade wenn sich alles erwärmt und dann der Strom nochmals ansteigt. Die Angaben laut Sovol:
        Normal > XY 0.56-0.58V / Z 0.82-0.85V / E 0.72-0.75V
        SilentBoard > XY 0.56V / Z 0.72V / E 0.64V

      • Jerrit

        1. April 2020, 8:56

        Beim Montierten Silentboard messe ich (2000m) XY 1196 / Z 1600 / E 1392.

        • CopterTec

          1. April 2020, 10:13

          Das kann ich jetzt nicht ganz nachvollziehen. XY 1,196V oder 0,1196V?

          • Alfons

            14. Januar 2021, 21:05

            I just upgraded to the Silent Board too, and the pre-set Vref values are:
            X: 1.01 V
            Y: 0.99 V
            Z: 1.34 V
            E: 1.17 V

            I expected them to be higher than the stock A4988 drivers because the TMC2208 provides lower current, but I really don’t get how to calculate the „ideal“ values for this board with the stock steppers.
            Any ideas?

            • CopterTec

              15. Januar 2021, 8:18

              Thats one of these good question we asked Sovol via Facebook… never got an answer. Please ask Sovol directly. We don’t know the correct values too.

    • Max

      31. März 2020, 18:52

      Moin,
      erstmal Vielen Dank für das Warten und Bereitstellen der Firmwares fürs Sovol SV01.

      Hätte da noch eine Frage: Ist es möglich die in Codezeile 1303 [1] definierte maximale Gitterpunkteanzahl im Sovol SV01 Menü anzupassen? Oder kann man dies nur im Sourcecode anpassen und „Hardcompilen“? Anscheinend ist mein Bett so uneben, dass eben die 3×3 Gitterpunkte nicht reichen, um die Wölbung auszugleichen…

      Viele Grüße!

      [1] „#define GRID_MAX_POINTS_X 3“

      • CopterTec

        31. März 2020, 20:43

        Hallo, derzeit sieht Marlin das leider nur im Code vor. Wäre eventuell aber auch über das Display machbar. Müsste ich mir einmal ansehen. Grüße Fabian

    • CopterTec

      29. März 2020, 14:44

      News: Upgrade to Marlin-2.0.5.2

    • Andreas Rudolph

      27. März 2020, 15:08

      Hallo zusammen,
      danke für die tolle Arbeit.
      Ich habe allerdings ein Prpblem. Wie kann ich nach dem unified bed leveling das Z-offset anpassen?
      Nach dem UBL ist der Abstand zum Hotbed zu groß.

      Gruß
      Andreas

      • CopterTec

        27. März 2020, 20:30

        Hallo, sehr gerne. Das geht ganz einfach über das Menü. Dort gibt es eine Option für das Z-Offset. Gegebenenfalls müssen vorher die Endstopper deaktiviert werden, damit die Z-Achse weit genug herunter fährt. Grüße Fabian

    • Thorsten

      23. März 2020, 18:02

      Hallo
      Gibt es da was für das SKR V1.1. Das 32bit Board.
      Hab noch so eins hier liegen. Mfg

      • CopterTec

        23. März 2020, 18:03

        Hallo, leider haben wir die nötige Hardware nicht, daher können wir auch keine Firmware anpassen und testen.

    • Gary Garland

      19. März 2020, 17:57

      Thank you for providing this service. Last night I upgraded the firmware to the Sovol BL Touch hex file – leveling corners appeared to be manual – i think the bl touch sensor engaged once, in the middle and then it went to the corners manually without the sensor activating.
      I tried the bed leveling, and that was a disaster. In an attempt to create the mesh, it would show something like „position 1 of 100, 2 of 100, etc.“ – but it wouldn’t move other than the z axis – i.e. it kept poking in the same spots. I tried following the instructions with Marlin and got a fatal BL touch sensor error – something like 999 and had to power cycle my Sovol. any help or guidance appreciated!

      • CopterTec

        19. März 2020, 18:36

        Hi, yes that’s a problem with the current pre release 1.6.1/2.0.5.1. Please use the latest stable release 1.5.2 based on Marlin 2.0.3.

      • Gary Garland

        20. März 2020, 18:26

        Thank you for the quick reply. It seems the issue was with me, not the firmware – I forgot to connect the BL Touch Z wiring (removing the Sovol’s Z switch wiring) – once I did that, the sensor worked fine – I still need to tweak it, and i’d be grateful for some sort of documentation or walk through on the UBL setup, etc. – but last night all 100 points probed successfully. I think i’ll need to redo it, as even though it said cold bed (i thought that was a term for a new mesh) i think it literally meant room temperature, and i heated it – so i’ll try to follow as best as i can, but i will say i think the 1.61 is working. Thank you!

        • CopterTec

          21. März 2020, 22:18

          Hi, great that you found the problem. I also fixed some „Level Bed Corner“ issues. Please use the latest 1.6.1 RC2. UBL is totally different… but you can find some good tutorials on Youtube. I heat up the bed and the nozzle for the offset. After this I cool down the nozzle and start with the 100 points probe. You are welcome.

          • Gary Garland

            8. Juni 2020, 22:44

            I am grateful and thank you for the effort of the precomplied firmware – it works GREAT on my Sovol. i have another printer (CR-10 S5) where i compiled my own firmware, and i have it soooo close, but not perfect. Would it be possible for you to share the config.h file for the Sovol, preferably with BL touch and the regular board? My issue was initially that I couldn’t disable steppers on the S5 (figured that out) – however when i follow the latest Bardwell video, my G29 J probes off the board for the 3 point level – i don’t know if i missed probe settings or something else in the config, so i would try to reconstruct what you did. when i downloaded the source from github it didn’t have (or i didn’t see) the config.h for the Sovol. As always, THANK YOU for your great work!

            • CopterTec

              8. Juni 2020, 22:48

              Hi, you are welcome. Please checkout the folder /config/SOVOL on Github.

    • Marchande Dark

      17. März 2020, 6:00

      perhaps im missing something, or perhaps the name is difernt.. im trying to figure out where to set the z offset for this so I can calibrate my bltouch, I find the probe offsets but I dont think they are the same… thoughts?

      • CopterTec

        17. März 2020, 10:21

        Hi, leveling is a bit different since UBL. You can set it via the display (there is a offset). The probe offset inside the source code is for hardcoding this.

        • Marchande Dark

          17. März 2020, 20:06

          perhaps im missing something…(and mostlikely doing something wrong) I can find the z probe offset, and if I set it to a it – value it adds that much to the autohome z height, and then when it goes to print its that much higher off the build plate.. its beeen a while since I have played with rewriting marlin but is z probe offset and z offset two diferent values/varables?

          • Marchande Dark

            17. März 2020, 23:22

            never mind, finaly figured it out, I was in the right spot, just not giving it enough …. working perfectly now.. only thing im missing in linear advance.. will that be coming back?

            • CopterTec

              18. März 2020, 8:22

              Great. Lineare Advanced make a lot trouble at the moment. Hope the Marlin community will fix this soon….

    • CopterTec

      15. März 2020, 13:20

      News: Upgrade to Marlin-2.0.5.1

      • Mariusz Fager

        15. März 2020, 20:35

        Hi.
        Found error in Version Marlin-2.0.3
        When Filament Replacement is called from G-code, Y axis goes out of range and motors lose steps.
        Is this fixed in 2.0.5?

        • CopterTec

          16. März 2020, 3:10

          Hi, yeah I think it’s fixed now. Please try it.

    • Claus Ziegler

      9. März 2020, 11:04

      Hallo,
      super, dass Ihr Eure Arbeit für den Sovol so zugänglich macht!!
      SKR mini E3 habt Ihr das noch auf dem „Radar“
      Der Grund für ein 32bit board wäre für mich die genannten Probleme mit der USB Anbindung und Octoprint oder Repetier Server bei Marlin 2 und der endlichen Rechenkapazität des jetzigen original Boards. Ich würde gerne den Sovol mit dem Repetier Server nutzen, das wäre schon komfortabler als immer mit der Speicherkarte zu hantieren. Oder gibt es da zwischenzeitlich andere Erfahrungen bei Euch?
      Viele Grüße
      Claus

      • CopterTec

        9. März 2020, 11:17

        Hallo, wir haben den Sovol verkauft und uns einen Prusa angeschafft. Es gab Probleme mit der Betthaftung und leider hat sich Sovol als ungenügend für spezielle technische Fragen erwiesen. So warten wir noch heute auf eine Information, ob das Silentboard einen TMC auf der Z Achse besitzt. Leider nicht die besten Neuigkeiten für Sie… Grüße Fabian

        • Stephen White

          13. März 2020, 13:41

          as you have sold your sovol does that mean you will no longer be compiling later version’s past 2.0.3?

          • CopterTec

            13. März 2020, 13:54

            Hi, we continue to compile updates for the Sovol SV01. But in the current firmware 2.0.4.4 is a bug. So we wait for the next release.

    • Tommy

      12. Februar 2020, 13:55

      How can i use an inductive Sensor ?

      • CopterTec

        12. Februar 2020, 14:21

        Hi, you need to compile your own code and implement this type if sensor.

    • Wolferine

      10. Februar 2020, 12:01

      Hi,
      what is the bed size in this firmware? Thanks

    • Lisa

      8. Februar 2020, 0:52

      Installed the silentboard with bl touch, now when i select Auto Home it goes to the center like normal and turns the probe on and off 3 times then Stops ?

      • CopterTec

        8. Februar 2020, 11:19

        Hi, please reset the printer like described. Did you tested the BLTouch with the original firmware? Sounds a bit like a incorrectly inserted sensor.

    • Leroy Michael

      5. Februar 2020, 9:21

      Good morning,

      I installed the latest version of your firmware on my sovol but I have a problem with the bltouch the g29 command in the Gcode startup script doesn’t work anymore so I modified to G29 P1 but it makes me 100 probing points ! Could you please tell me how to get a 3X3 or 5X5 probing grid.
      Thank you for your work.

    • CopterTec

      31. Januar 2020, 13:46

      News: Upgrade to Marlin-2.0.3

    • kris groves

      21. Januar 2020, 17:00

      Any chance I can get a zip copy of the marlin folder for the sovol regular board with bltouch in english so i can make some of my own changes without starting from scratch? thanks

      • CopterTec

        21. Januar 2020, 17:09

        Hello, please check the link above. You can find the source code on Github including the code for the Sovol regular board.

    • trohn_javolta

      18. Januar 2020, 15:17

      „More variants if you want. Leave a comment.“..

      Hi, ich hab mir für meinen SV01 das SKR Mini E3 Mainboard von Bigtreetech bestellt, wär es möglich, dass ihr dafür eine Bl-touch Version anbietet?
      Es soll quasi ein drop-in replacement sein (eig. für den Ender 3) aber passt auch für den SV01, hat tmc 2209 stepper treiber, nur die firmware passt dann nicht vom Ender 3.
      Hier hat schon wer was dafür gemacht: https://github.com/prahjister/BIGTREETECH-SKR-mini-E3
      Allerdings wahrsch. nicht mit euren tweaks, die hätt ich schon gern.
      Kenn mich leider ehrlich gesagt zu wenig aus….
      Im bigtreetech fork steht zb. „…lineal advance works well“ bei euch wurds entfernt? „Remove LIN_ADVANCE to prevent errors“
      Dafür les ich bei euch „Increase DEFAULT_MAX_ACCELERATION to Marlin default“ beim bigtreetech fork ist der Wert niedriger eingestellt.

      • CopterTec

        18. Januar 2020, 16:40

        Hallo, ich würde gerne eine Version für das SKR Board erstellen. Allerdings ist dies ohne die passende Hardware fast nicht möglich bzw. führt nur zu Fehlern und unbefriedigenden Ergebnissen. Das SKR Board steuert die Motortreiber richtig, bidirektional über UART an. Dies ist beim Sovol Board leider nicht der Fall. Daher funktioniert Lineare Advanced beim SKR gut und führt beim Sovol nur zu Druckausfällen. Ich persönlich bin auch absolut kein Freund vom Sovol SilentBoard… meiner Meinung nach ein billiger Umbau auf leisere Motortreiber. Grüße Fabi

        • trohn_javolta

          18. Januar 2020, 17:12

          Schade, aber verständlich.
          Gibt’s eine Möglichkeit euch zu supporten? Das SKR mini E3 gibt’s zb. auf banggood schon für 25 Euro, einen 5er würd ich ohne Nachdenken für ein Exemplar für euch beisteuern.
          Oder man könnte auch bei bigtreetech um ein Exemplar zu Reviewzwecken anfragen, die geben bestimmt eins gratis her, wenn iwo auf eurer HP ein kurzes Review veröffentlicht würde… Nur so eine Idee.

          • CopterTec

            18. Januar 2020, 17:35

            Danke für die Unterstützung, uns fehlt aber gerade leider auch etwas die Zeit. Ich denke das dürfte ein schönes Projekt nach unserem Mexico Aufenhalt im nächsten Monat sein.

    • Carsten

      13. Januar 2020, 9:01

      Gute Arbeit mit der Firmware, das Unified Bed Leveling ist super.
      Allerdings habe ich seit dem Upgrade häufige disconnects von Octoprint wegen Problemen mit dem serial port. Als Folge bricht der Drucker einfach ab. Es scheint sich um ein Problem mit der USB Schnittstelle auf Druckerseite zu handeln. Irgendwas bekannt?

      • CopterTec

        13. Januar 2020, 9:51

        Hallo, vielen Dank. Das Problem mit dem USB Port ist bekannt. Marlin 2 benötigt leider wesentlich mehr Prozessorleistung, wodurch es manchmal zu Verbindungsabbrüchen kommt. Am besten immer direkt von der Mikro SD Karte drucken.

        • Carsten Burghardt

          13. Januar 2020, 18:29

          Gibt’s eine Möglichkeit die aktuelle Marlin 2.0 Bugfix branch für den Sovol zu publizieren? Das 2.0.1 scheint ein wenig älter zu sein.

          • CopterTec

            13. Januar 2020, 18:43

            Hallo, steht schon auf dem Plan sobald etwas Zeit übrig ist. Allerdings ist laut den Commits auch nicht viel passiert (nur für 32 Bit Boards). Somit lohnt sich ein Upgrade von Marlin-2.0.1 auf Marlin-2.0.x-bugfix bisher noch nicht.

    • Sam D

      9. Januar 2020, 16:46

      When I compile the source code and load it the printer will just show a blue screen Are you supposed to copy the Configuration.h and Configuration_adv.h from the config/example folder and overwrite the files in the Marlin folder? Why are the source files not working?

    • Bas

      8. Januar 2020, 19:58

      I want to use one of the hex files as firmware but I also want to add a e3d v6. How can I configure the hex file to use a e3d v6?

      • CopterTec

        8. Januar 2020, 20:46

        Hi, you need to change the „Configuration.h“ and „Configuration_adv.h“. But this is a lot of work… including compiling.

    • Sam Delfino

      8. Januar 2020, 16:18

      There are 3 versions of the firmware. Which version is the source code. I am trying to modify source for LED support. If I compile source is there anything that needs to be done to get standard non bl and non silent board

      • CopterTec

        8. Januar 2020, 16:28

        Hi, none of them. We have four versions in eight different languages. So completely 32 versions. Please check the release page on Github. There you will find the source code (.zip ord .tar.gz). As described below, you can find the four versions inside the folder /config/examples/SOVOL.

        • Sam D

          9. Januar 2020, 2:26

          When I compile the zip files and upload the firmware it causes the an issue where you just get a blue screen. Are you supposed to overwrite the Configuration.h and Configuration_adv.h files from the Marlin folder with the same files from the config/examples folder?

          • CopterTec

            9. Januar 2020, 9:08

            Yes, just copy all files from (example) /config/examples/SOVOL/SV01 to /Marlin. Then use PlatformIO or any other supported compiler and build the .hex file. Does the printer work with the compiled files we uploaded?

    • Syncros

      7. Januar 2020, 1:09

      Hallo, ich habe mir für den Sovol als Upgrade das E3D V6 Hotend und den dazugehörigen Thermistor bestellt. Diesen sollte man laut E3D in der Firmware auf #define TEMP_SENSOR_0 5 stellen.
      Im Source Code den man downloaden kann sind bei allen Einstellungen nur die Defaultwerte hinterlegt, oder? z..B. BL Touch
      Könntest Du ein geändertes hex File für das E3D V6 Hotend oder einen Sourcecode mit dem Sovol Werten anbieten. Wäre super?? Danke!

      • CopterTec

        7. Januar 2020, 10:28

        Hallo, der Source Code ist bereits vorhanden. Bitte im Ordner /config/examples/SOVOL schauen. Grüße

    • Sam D

      6. Januar 2020, 18:33

      I would like to get this I have uploaded firmware but just have a blue screen. I have tried multiple times. Ideas?

      • CopterTec

        6. Januar 2020, 18:53

        Hi, please remove the SD card and try it again. Also try Arduino (Upload Binary) instead of Cura.

    • Duke

      5. Januar 2020, 1:39

      Kann man den source bekommen ? Für Umbau auf ein anderes Board?

      • CopterTec

        5. Januar 2020, 17:41

        Hallo, dieser ist oben bereits verlinkt. Bitte unter /config/examples/SOVOL nachsehen.

    • Stephan W.

      2. Januar 2020, 9:14

      Hi und frohes neues Jahr.

      Ich hab den Sovol mit dem Mainboard 2.2.
      Ich denke Mal das es sich um das SilentBoard handelt.

      Das wiederrum bedeutet das ich sie SilentBoard-firmware nehmen kann.
      Muss ich dann irgend was spezielles einstellen oder kann ich es nach dem auf spielen einfach benutzen?

      LG: Stephan

      • CopterTec

        2. Januar 2020, 18:52

        Hallo und vielen Dank. Wir wünschen ebenfalls ein gesundes neues Jahr 2020. Das original installierte Board (Creality 2.2) ist ein „nicht“ SilentBoard. Allerdings kann man die beiden auch optisch nicht unterscheiden (die Motortreiber werden bei Sovol nur ausgetauscht). Wenn man druckt hört man beim SilentBoard keinerlei Geräusche von den Motoren. Grüße Fabian

    • Trohn Javolta

      21. Dezember 2019, 11:45

      Hi, I read that the adavanced feature „linear advance“ increases print quality. Any way you could try that (maybe on an xyz cube) and if it does, can you include that in your compiled firmware?

      • CopterTec

        21. Dezember 2019, 19:14

        Hi, yes „linear advance“ is already build in. Please check the release notes on github.

        • Trohn Javolta

          23. Dezember 2019, 19:20

          Nice thx. And for Silent board firmware is it disabled? I saw that it’s problematic with TMC2208 drivers: https://youtu.be/n3yK0lJ8TWM?t=64
          Just putting it out there in case you didn’t know, I myself have no experience with silent boards yet.

          • CopterTec

            23. Dezember 2019, 19:23

            You are welcome ;-). SilentBoard firmware is optimized too. We use the latest Bugfix so no need to disable Junction anymore. And also the K-Factor calibration is done. Just try it. For best results you need to calibrate a lot of things (PID, K-factor, Junction, E-step) but that’s not important for a great first print.

    • Rico Förster

      21. Dezember 2019, 3:18

      Ja habe ich, erst Update dann den G-Code drucken und danach ausschalten wieder an und alle Achsen Home fahren.

      • CopterTec

        21. Dezember 2019, 19:15

        Hallo, der Fehler wurde von einer weiteren Person ebenfalls bestätigt. Kümmere mich morgen um einen Bugfix. Danke für den Hinweis.

      • CopterTec

        22. Dezember 2019, 16:53

        TMC ERROR SOLUTION FOR MARLIN 2.0.x:
        For everyone with silentboard. Please use „Marlin_2.0.x-Sovol_SV01-1.3.8-en.hex“ instead of „Marlin_2.0.x-Sovol_SV01-1.3.8-en_SilentBoard.hex“.

        Reason: The „…Silentboard.hex“ version comes with UART control for the TMC2208 drivers. But the motor drivers wired wrong for this new way of communication. Sovol use the „good old way“ to control the TMC2208 (like the A4988). So please choice the normal version for the Silentboard too.

      • CopterTec

        23. Dezember 2019, 13:40

        This problem is fixed in Release 1.4.0.

    • Rico Förster

      21. Dezember 2019, 0:41

      Habe auf das SilentBoard die Marlin_2.0.x-Sovol_SV01-1.3.8-en_SilentBoard-BLTouch.hex aufgespielt , habe aber Fehler TMC Connetion Error , wie kann man das beheben? Habe die Firmware auch ein zweites mal aufgespielt ,der fehler bleibt .

      • CopterTec

        21. Dezember 2019, 1:51

        Hallo, wir haben hier leider noch kein Silentboard zum testen. Die kompilierte Version wurde bei einem anderen Nutzer erfolgreich geprüft. Haben Sie nach dem Upload wie beschrieben einen Reset durchgeführt?

    • John OConnor

      20. Dezember 2019, 22:54

      I’m on the latest build. When I install an sd card, the printer becomes unresponsive. If I take out the card, I can move about the menus. I’ve used the card on this machine with the default firmware and it works fine. It’s an 8 gig card. Any advise? Thank you in advance.

      • CopterTec

        21. Dezember 2019, 1:42

        Hi, thats a common problem. The latest version uses an alphabetical sorting of the SD card filenames. Sometimes you need to format the card, please try. One important thing: don’t use any special file name characters.

    • Heiko

      20. Dezember 2019, 16:14

      Hallo,

      Wenn ich nur den Original SV01 ohne silent stepper habe, kann ich dann mit „Marlin_2.0.x-Sovol_SV01-1.3.8-de.hex“ Mesh Leveling machen? Danke sehr.

      Grüße
      Heiko

      • CopterTec

        20. Dezember 2019, 16:42

        Hallo, ja genau. „Marlin_2.0.x-Sovol_SV01-1.3.8-de.hex“ ist für den original Drucker ohne umbauten. Diese Version besitzt manuelles Mesh Leveling. Die Version „Marlin_2.0.x-Sovol_SV01-1.3.8-de_BLTouch.hex“ ist ebenfalls für das original Board aber mit einem installiertem BLTouch Sensor. Dort wird dann das neue Unified Bed Leveling (UBL) eingesetzt. Die „SilentBoard“ Versionen sind für die leiseren Motortreiber. Grüße

      • CopterTec

        23. Dezember 2019, 13:41

        Alle Sprachen hinzugefügt in Release 1.4.0.

    • Ulf Gnulf

      20. Dezember 2019, 12:45

      Hey , ich hab ein SKR V1.1 Board hier rumliegen und würde da gerne TMC2208 als Standalone laufen lassen (also alle Jumper drinnenlassen oder?) Nur wenn ich den source code runterlade, ist da gar nix für den Sovol eingestellt. Sogar Filament Durchmesser ist auf 3mm eingestellt. Bitte einfach deine Config.h und config.adv zum download bereitstellen. danke

      • CopterTec

        20. Dezember 2019, 13:27

        Hallo, mit den Jumpern beim SKR V1.1 kennen wir uns leider nicht aus. Zum Source Code: Es müssen die Dateien aus dem Verzeichnis „config/examples/SOVOL/…/“ in das Hauptverzeichnis „Marlin/“ kopiert werden. Dann sollte es funktionieren. Grüße Fabian

    • Florian Schmidt

      19. Dezember 2019, 22:54

      The bltouch probe point are too clode to the edge

      • CopterTec

        20. Dezember 2019, 1:29

        The distance between BLTouch and bed edge is 25mm. Can you please explain why you need more distance. That would really help.

        • Florian Schmidt

          20. Dezember 2019, 23:27

          By me the probing is at 1 mm of the back of the heatbed.

          • CopterTec

            21. Dezember 2019, 1:48

            Ok that’s not normal. It would be nice if you could provide me some information such as printer modifications, steps before leveling, board type, firmware version, etc.. Also upload the firmware again and reset the printer, please.

      • CopterTec

        23. Dezember 2019, 13:42

        Fixed with Release 1.4.0.

    • Rico Förster

      19. Dezember 2019, 21:23

      Könnten Sie die Versionen auch in Deutsch anbieten? Marlin_2.0.x-Sovol_SV01-1.3.8-en_SilentBoard-BLTouch.hex und Marlin_2.0.x-Sovol_SV01-1.3.8-en_BLTouch.hex .

      • CopterTec

        20. Dezember 2019, 1:27

        Gerne. Kommt im nächsten Release dazu.

    • Torsten Schmid

      19. Dezember 2019, 9:42

      Wünsche mir die Versionen Marlin_2.0.x-Sovol_SV01-1.3.8-en_SilentBoard-BLTouch.hex und Marlin_2.0.x-Sovol_SV01-1.3.8-en_BLTouch.hex , da ich einen mit und einen ohne SilentBoard erst geliefert bekommen habe (leider komme ich erst die Weihnachten zum aufbauen). Herzlichen Dank im voraus

      • CopterTec

        19. Dezember 2019, 10:04

        Hallo, diese beiden Versionen gibt es sogar schon ;-). Oder sollen diese noch in deutsch verfügbar sein?

    Schreiben Sie einen Kommentar zu Thorsten Antworten abbrechen